<< Tektronix Accessories | << Tektronix Oscilloscope Probes | << Tektronix Current Probes
<< Tektronix Probes & Accessories Price List
Tektronix TCP0030
AC/DC Current Probe, 120 MHz TekVPI 30 A
|
 
TCP0030 AC Current Probe Shown
|
Features & Benefits
- Easy-to-use and Accurate AC/DC Current Measurements
- Connects Directly to DPO7000 and DPO4000 Series Oscilloscopes
Using the New TekVPI™ Probe Interface
- Provides Automatic Units Scaling and Readout on the Oscilloscope
Display
- Split-core Construction Allows Easy Circuit Connection
DC to
>120 MHz Bandwidth
- 30 A RMS Maximum Current Capability
- 50 A Peak Pulse Current Capability
- High Accuracy with Typically Less than 1% DC Gain Error
- Accurately Measures Current Levels as Low as 1 mA
- Low Noise and DC Drift
- Easy to Degauss and Autozero
- Setup Controls and Probe Status/Diagnostic Indicators are
Provided on Both the Probe Hardware, and through an Easy-to-Access
Oscilloscope UI Display Menu
- Safety Certified for U.S. and Canada
Applications
- Power Supplies
- Semiconductor Devices
- Power Inverters/Converters
- Electronic Ballasts
- Industrial/Consumer Electronics
Mobile Communications
- Motor Drives
- Transportation Systems
Tektronix TCP0030 is a high-performance, easy-to-use AC/DC current
probe designed for use and direct connection (without the need of an
additional power supply) to the TekVPI™ probe interface used on Tektronix'
new DPO7000 and DPO4000 Series Oscilloscopes. This AC/DC current
measurement probe provides greater than 120 MHz of bandwidth with
selectable 5 A and 30 A measurement ranges. It also provides exceptional
low-current measurement capability and accuracy to current levels as low
as 1 mA, important for meeting today’s challenging current measurement
needs.
Specifications
|
Characteristics
- Bandwidth - DC to ≥120 MHz
- Rise Time - ≤2.92 ns
- Max RMS Current - 30 A
- Max Peak Pulse Current - 50 A
- Minimum Sensitivity
- 1 mA (on oscilloscopes that support 1
mV/div setting)
- AC Coupling (on oscilloscopes that
support AC/DC coupling)
- Current Ranges - 5 A and 30 A
- Max Bare-wire Voltage - Use insulated wire
only
Typical Characteristics
- DC Accuracy
- ±1% typical
- ±3% warranted
- Max Amp-second Product - 500 A*µs (in 30 A
Range)
- Insertion Impedance -
- 1 mΩ at 10 kHz
- 3.5 mΩ at 100 kHz
- 0.08 Ω at 1 MHz
- 0.15 Ω at 10 MHz
- 0.7 Ω at 100 MHz
- 0.85 Ω at 120 MHz
- Signal Delay - 14.5 ns
|
Environmental
- Temperature
- Operating: 0 ºC to +50 ºC
- Nonoperating: -40 ºC to +75 ºC
- Humidity -
- Operating: 5% to 95% Relative Humidity (RH)
at up to +30 °C; 5% to 85% RH above 30 °C up to +50 °C,
noncondensing
- Nonoperating: 5% to 95% Relative Humidity
(RH) at up to +30 °C; 5% to 85% RH above 30 °C up to +75 °C,
noncondensing
- Altitude -
- Operating: Up to 3,000 m (10,000 ft.)
- Nonoperating: Up to 12,192 m (40,000 ft.)
Regulatory
- Compliance Labeling
- CE (European Union)
- WEEE (European Union)
- Physical Characteristics
- Probe Head Size (H x W x L) 1.25" x
0.625" x 7.77"
- Other Dimensions
- Cable Length: 79"
- Max Conductor Diameter: 0.15"
- Shipping Weight: 3.44 lbs
- Power Requirements: TCP0030 is powered
directly by the DPO7000 and DPO4000 Series Oscilloscopes
using TekVPI™ interface
|
|
Recommended Oscilloscopes - DPO7000 and DPO4000
Series Oscilloscopes with TekVPI™ probe interface.
Standard Warranty - One year parts and labor.
|
|
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| TCP0030 |
Tektronix TCP0030 120 MHz TekVPI 30 Ampere AC/DC current probe |
 |
Sale $2,997.00
(Reg. $3,330.00) |
| Included Accessories |
| |
- (1) Instruction manual (071-1812-xx English)
- (1) Protective Cover
(016-1923-xx)
- (1) Probe Ground Lead – 6 in. length (196-3120-xx)
- (1)
Nylon Carrying Case (016-1952-xx)
|
Included |
| Recommended Accessories |
| 015-0601-50 |
Current Loop, 1 Turn, 50 Ω with BNC connector
used for Performance Verification |
Please Call |
|
)
PDF
Help