This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Tektronix TAP2500
2.5 GHz Single-Ended Active FET Probe with TekVPI Interface
TAP2500
TAP2500
Tektronix TAP2500
2.5 GHz Single-Ended Active FET Probe with TekVPI Interface
TAP2500
TAP2500
The Tektronix TAP2500 2.5 GHz Single-Ended Active FET Probe with TekVPI Probe Interface provides excellent high-speed electrical and mechanical performance required for today's digital system designs.
- Small compact probe head for probing small geometry circuit elements
- DUT attachment accessories enable connection to SMDs as small as 0.5 mm pitch
- Robust design for reliability
- Connects directly to oscilloscopes with TekVPI probe interface
- Small compact probe head for probing small geometry circuit elements
- DUT attachment accessories enable connection to SMDs as small as 0.5 mm pitch
- Robust design for reliability
- Connects directly to oscilloscopes with TekVPI probe interface
- Provides automatic units scaling and readout on oscilloscope display
- Easy access to oscilloscope probe menu display for probe status/diagnostic information and to control probe DC offset
- Remote GPIB/USB probe control through oscilloscope
- Bandwidth (probe only): ≥2.5 GHz
- Bandwidth (probe only): DC to ≥2.5 GHz
- Rise time (probe only): <140 ps
- Input capacitance: ≤0.8 pF
- Input resistance: 40 kΩ
- Input dynamic range: -4 V to +4 V
- Input offset range: -10 V to +10 VDC
- Maximum non-destructive input voltage: ±30 V (DC + peak AC)
- Propagation delay: 5.3 ns
Applications
- Verification, debug, and characterization of high-speed designs
- Signal integrity, jitter, and timing analysis
- Manufacturing engineering and test
- Signals with voltage swings up to 8 Vp-p
The Tektronix TAP2500 2.5 GHz Single-Ended Active FET Probe with TekVPI Probe Interface provides excellent high-speed electrical and mechanical performance required for today's digital system designs.
Active probe for TekVPI probe interface
Selecting the right probe for the application is key to attaining the best signal fidelity in any relevant measurement. Active probes provide truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and a unique interface, the TAP2500 Single-ended Active FET probe provides excellent high-speed electrical and mechanical performance required for today's digital system designs.
Specifically designed for use and direct connection to oscilloscopes with the TekVPI probe interface, the TAP2500 Active FET probe achieves high-speed signal acquisition and measurement fidelity by solving three traditional problems:
- Lower DUT loading effects with ≤0.8 pF input capacitance and 40 kΩ input resistance
- Versatile DUT connectivity for attaching to small SMDs
- Preserves instrument bandwidth at the probe tip for up to 3.5 GHz oscilloscopes
| Country of Origin | United States |
|---|---|
| Brand | Tektronix |
| Condition | NEW |
- 1 - 2.5 GHz Single-Ended Active FET Probe with TekVPI Interface (TAP2500)
- 1 - Set of (2) Y-Lead Adapters and 3 in. (3) Ground Leads
- 2 - Micro CKT Test Tips
- 1 - Set of (5) Customizable Ground Leads
- 1 - Color Band Kit (5 Colored Pairs)
- 1 - Set of (10) Pogo Pin Grounds
- 1 - Set of (10) Square Pin Sockets
- 1 - Set of (10) Push-In Probe Tips
- 1 - Set of (10) Right-Angle Adapters
- 1 - Set of (4) SureToe Adapters
- 1 - Antistatic Wrist Strap
- 1 - Nylon Carrying Case
- 1 - Plastic Accessory Case
- 1 - User Manual
