<< Tektronix Accessories | << Tektronix Oscilloscope Probes | << Tektronix Differential Probes | << Tektronix High Voltage Probes
<< Tektronix Probes & Accessories Price List
Tektronix P6250
500 MHz High-voltage Differential Probe
with TekProbe-BNC Level II Interface,
Discontinued
Replaced by: P6251
|
 
P6251 High Voltage Probe Shown
|
Features & Benefits
Outstanding Electrical Performance
- 500 MHz Probe Bandwidth
- <1 pF Differential Input Capacitance
- 1 MΩ Differential Input Resistance
- ±42 V (DC + pk AC) Differential Input Voltage
- >18 dB CMRR (at 250 MHz 50x attenuation)
- Selectable Bandwidth-limiting Filters
- DC Reject
Versatile DUT Connectivity
- Small Compact Probe Head for Probing Small Geometry
Circuit Elements
- Straight Pin, Square Pin, Solder Down, Variable
Pitch Standard Accessories
- Robust Design for Reliability
Easy to Use
- Provides Automatic Units Scaling and Readout on the
Oscilloscope Display
- Connect Directly to TDS5000 and other TekProbe™
Interface Oscilloscopes, or to TekConnect®
Oscilloscopes Using TCA-BNC Adapter
Applications
- High-speed Switch Mode Power Supply Design
- CAN/LIN Bus Design
- High-speed Digital Design
- Digital Design and Characterization
- Manufacturing Engineering Test
- Research and Development
The TDP1000,
TDP0500,
P6251, and P6250
High-voltage Differential Probes provide excellent high-speed
electrical and mechanical performance required for today’s
Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed
digital system designs.
Specifically designed for use with and direct connection to
Tektronix oscilloscopes with either the TekVPI™ probe interface, or
TekProbe BNC Interface. The
TDP1000,
TDP0500,
P6251, and P6250
High-voltage Differential Probes achieve high-speed signal
acquisition and measurement fidelity by solving three traditional
measurement challenges:
- Outstanding Electrical Performance
- Versatile Device-Under-Test Connectivity
- Ease of Use
Specifications
|
Characteristic |
Description |
|
Bandwidth (Probe only) |
500 MHz |
|
Attenuation |
5x, 50x |
|
Rise Time (Probe only) |
<700 ps |
|
Differential Input Capacitance |
<1 pF |
|
Differential Input Resistance |
1 MΩ |
|
CMRR |
>55 dB at 30 kHz, >50 dB at 1 MHz, >18 dB at 250 MHz (warranted
at 50x attenuation) |
|
Sensitivity/Noise Level |
2 mVRMS (5x attenuation), 1 mVRMS (50x
attenuation) referred to the probe output, 10 mVRMS (5x
attenuation), 50 mVRMS (50x attenuation) referred to the
probe input |
|
Differential Mode Input Voltage |
±42 V (DC + pk AC); 30 VRMS |
|
Common Mode Input Voltage |
±35 V (DC + pk AC); 25 VRMS |
|
Input Offset Range |
±4.25 V (5x attenuation); ±42 V (50x attenuation)
|
|
Max Input Voltage (Nondestruct) |
±100 V (DC + pk AC) |
|
Selectable Bandwidth Filter Limits |
5 MHz, Full |
|
DC Reject |
0.4 Hz (5x), 4 Hz (50x) |
|
Gain Accuracy at DC |
±2% |
|
Propagation Delay |
6.5 ns |
|
Scope Interface |
TekProbe BNC Level II Interface |
| Power Requirements |
P6250 and P6251 are powered directly by the TekProbe-BNC
interface, eliminating the need for additional power supplies and
cables when used with TekProbe-BNC oscilloscopes.
P6250 and P6251 may also be powered through the 1103 TEKPROBE
Power Supply for use with non-TekProbe interface
instrumentation.
|
| Standard Warranty |
1-year parts and labor |
| Recommended Oscilloscopes |
TDS5000 Series, TDS500,
TDS600, and TDS700 Series, and other Tektronix oscilloscopes with
TekProbe BNC-Level2 interface DPO70000, DSA70000, TDS6000, and
TDS7000 oscilloscopes with TekConnect® Interface and TCA-BNC
Required Adapter |
| Required Oscilloscope Firmware |
TekProbe-BNC Level II Oscilloscopes and adapter (TCA-BNC):
TekProbe-BNC interface is firmware-independent
|
|
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| P6250 |
Tektronix P6250 500 MHz High Voltage Differential
Probe with TEKProbe-BNC Interface, 42V (w/ Certificate of Traceable
Calibration) |
Discontinued
See: P6251 |
|
)
PDF
Help