HOME > SHIMPO > PANEL-MOUNT-COUNTERS > DT62CPS shimpo logo

Shimpo DT-62CPS
Panel Mount Counter - 6 Digit
Discontinued
See: DT-601CG

  • 2 user Programmable Presets
  • 2 independent relay outputs
  • Accepts NPN type sensors and rotary pulse generators
  • User programmable for up/down count mode
  • Can be reset externally.
Click here for a larger image - Shimpo DT-62CPSClick here for a larger image - Shimpo DT-62CPS
Shimpo DT-62CPS Shown

DT-62 CPS is an easy to use multifunction counters with dual bright red LED. This 72 mm square counter has two preset features, comes with two independent relay outputs. Terminals for 110V and 22 0V AC voltage source are available. Can accept NPN type sensors and rotary pulse generators. With user programmable for Up/Down count mode, this unit can be reset externally

Specification DT-62CPS
Digits -99,999 to 999,999
Preset Digits 0 to 999,999
Main Display 0.4 inch (10mm) Red LED
Preset Display 0.3 inch (7.6mm) Green LED
Scaling 0.0001 to 99.9999
Data Back Up EEPROM at least 10 Years
Out Puts 2 relay outputs rated at 240V, 5A
Data Back Up EEPROM at least 10 Years
Outputs 2 relay outputs rated at 250V, 5A
Voltage Supply 110V and 220V AC 50/60 HZ
Input Voltage 6 to 25VDC (high level) / 2 to –12VDC (low level) / Input
Resistance 8.2 KΩ
Non-Voltage Input “ON” impedance 2 KΩ (approximately 2 mA) / “ON” residual voltage 3V max / “OFF” impedance 900 KΩ
Auxiliary Voltage 12V, 100 mA Max
Operating Temperature -10C to 55C (14 F to 131 F)
Operating Humidity 35% to 85% RH
Counting Speed Selectable 25 HZ, 300 HZ, 3 kHZ
Dimensions 2.68” x 2.68” cutout, w/4.87” x 2.84” x 2.84” overall dimensions
 
Ordering Information
Model  Description Buy Online Price
DT62CPS Shimpo DT62CPS Panel Mount Counter 72mm 6 digit counter; hi, lo, go presets, scalable Discontinued
See: DT-601CG
DT62CPSDC Shimpo DT62CPSDC DC Panel Mount Counter 72mm 6 digit counter; hi, lo, go presets, scalable Discontinued
Included Items
 
  • 1 - User Manual
Included