SCS 81748

Metal-In Static Shield Bag 4 in. x 8 in. 100 Count

81748SCS
81748

SCS 81748

Metal-In Static Shield Bag 4 in. x 8 in. 100 Count

81748SCS
81748
  • Dimensions: 4 in. x 8 in.
  • Qualified to MIL-PRF-81705E Type III, Class 2; listed on the QPL under the Defense Standardization Program
$17.01
  • Dimensions: 4 in. x 8 in.
  • Qualified to MIL-PRF-81705E Type III, Class 2; listed on the QPL under the Defense Standardization Program
  • Film printing per MIL-PRF-81705E Section 3.6 is a buried layer that will not rub-off or become removed with chemicals like IPA
  • Standard stock bags are converted per MIL-DTL-117H
  • Puncture Resistance: 12 lbs
  • Metal-In film laminate 0.0028" thick (2.8 mil)
  • Dissipative Inner Surface Rs ≥ 1 x 105 to < 1 x 1012 ohms/sq per MIL-PRF-81705E Method 4.6.8 requirements
  • Dissipative Outer Surfaces Rs < 1 x 1012 ohms/sq per MIL-PRF-81705E Method 4.6.8 requirements
  • <10 nJ discharge shielding energy limit test per MIL-PRF-81705E Method 4.6.9
  • Lead-free RoHS 2, REACH and Conflict Minerals Compliant

The SCS 81748 Metal-In Static Shield Bag 4 in. x 8 in. 100 Count is a transparent metal-in static shielding bag is designed to provide a static safe environment for ESD sensitive electronic devices. This model has an open top and is heat sealable. The 81748 is manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.

More Information
Country of OriginUnited States
BrandSCS
ConditionNEW
Vendor Alias81748
  • 100 - Metal-In Static Shield Bags 4 in. x 8 in.