This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
SCS 817R 36X50
Metal-In Static Shield Film Roll, 36 in. X 50 ft.
817R36X50
817R 36X50
- Four layers: static dissipative coating, polyester, metal and polyethylene laminate
- Qualified to MIL-PRF-81705E Type III, Class 2; listed on the QPL under the Defense Standardization Program
- Film printing is a buried layer that will not rub-off or become removed with chemicals like IPA (per MIL-PRF-81705E Section 3.6)
- Heat-sealable
- 0.0028” thick (2.8 mil)
- Dissipative Inner Surface Rs ≥ 1 x 105 to < 1 x 1012 ohms/sq (per MIL-PRF-81705E Method 4.6.8 requirements)
- Dissipative Outer Surfaces Rs < 1 x 1012 ohms/sq (per MIL-PRF-81705E Method 4.6.8 requirements)
- <10 nJ discharge shielding energy limit test (per MIL-PRF-81705E Method 4.6.9)
- Lead-free RoHS 2, REACH and Conflict Minerals Compliant
The SCS 817R 36X50 Metal-In Static Shield Film Roll, 36 in. X 50 ft. is manufactured from four layers - static dissipative coating, polyester, metal and polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior is static dissipative and allows electrostatic charges to be removed when grounded.
| Country of Origin | United States |
|---|---|
| Brand | SCS |
| Condition | NEW |
| Vendor Alias | 817R 36X50 |
