Rohde & Schwarz NRVD
Dual Channel Power Meter Display Unit

Two independent channels performing simultaneous measurements
LC display with variable backlighting, separate digital readout for each channel, bargraph indicator
Menu-guided operation with softkeys
IEC/IEEE-bus interface (optionally SCPI or compatible with URV5)
Entry of reference values for level and attenuation
13 digital filters for noise suppression, automatic or manual filter selection
Storage of 20 complete instrument setups
Input/output option with DC frequency input, analog outputs, trigger input, ready output
Large variety of intelligent sensors: plug and play
Rear connectors for sensors
Sensor check source

Rohde & Schwarz
NRVD shown

Product Information
Datasheet	1.4 MB
PDF Help

NRVD functions like two independent NRVS power meters in one enclosure performing simultaneous measurements and exchanging data with each other. The two channels can be set separately so that two completely different measurements can be carried out at the same time. The two measured values can also be related to each other for readout of reflection coefficient, SWR or return loss, for instance.

Characteristics

Display
Measurement results are displayed with selectable resolution on a five-digit LCD with adjustable backlighting. The values measured in the two channels or one measured value plus an additional item of information are displayed.

The NRVD measures pulse-modulated RF signals like the NRVS. Additionally, the modulation depth of amplitude-modulated signals can be determined from the power variation. After entering the source matching, the expected uncertainty for thermocouple power sensors can be displayed.

Sensor check source
It supplies a highly accurate, low-distortion 50 MHz signal of 1 mW (0 dBm) power for checking the sensors.

Input/Output Option NRVD-B2
Each measurement channel has an analog output with selectable scaling for connection of a recorder or for control purposes. Simple automatic test routines can be implemented with the aid of the trigger input and the ready output. Another input serves for taking up the frequency-proportional DC voltage from a sweep generator for tracking frequency-response correction.

Ordering Information
Model	Description	Buy Online	Price
NRVD	Rohde & Schwarz NRVD Dual Channel power meter display unit, IEEE bus, digital /analog display		$6,150.00
Included Accessories
	(1) Operating Manual	Included
Options
NRVDB2	Rohde & Schwarz NRVD-B2 Analog output, trigger input sweep frequency input input/output Option for NRVD		$810.00
Optional Accessories
NRVDDKD	Rohde & Schwarz NRVD-DKD ISO17025 calibration incl. ISO 9000 calibration (order only with device)		$600.00
NRVDS1	Rohde & Schwarz NRVD-S1 Service kit for NRVD		$1,020.00
NRVZ102	Rohde & Schwarz NRV-Z1-02 Power sensor 50 Ohm 10 MHz - 18 GHz, 200 pW - 20 mW N-connector male, 1.3 m (4 ft) cable		$1,910.00
NRVZ15	Rohde & Schwarz NRV-Z15 Power sensor 50 Ohm 50 MHz - 40 GHz, 400 pW - 20 mW K(2.92 mm) male, 1.3 m (4 ft) cable		$2,920.00
NRVZ202	Rohde & Schwarz NRV-Z2-02 Power sensor 50 Ohm 10 MHz - 18 GHz, 20 nW - 500 mW N-connector male, 1.3 m (4 ft) cable		$2,060.00
NRVZ203	Rohde & Schwarz NRV-Z2-03 Power sensor 50 Ohm 10 MHz - 18 GHz, 20 nW - 500 mW N-connector male, 5 m (16 ft) cable		$2,290.00
NRVZ3102	Rohde & Schwarz NRV-Z31-02 Peak power sensor 50 Ohm 30 MHz - 6 GHz, standard model 1 µW - 20 mW		$2,310.00
NRVZ3103	Rohde & Schwarz NRV-Z31-03 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 1 µW - 20 mW high speed model		$2,310.00
NRVZ3104	Rohde & Schwarz NRV-Z31-04 Peak power sensor 50 Ohm 30 MHz - 6 GHz, TDMA model 1 µW - 20 mW		$2,310.00
NRVZ3204	Rohde & Schwarz NRV-Z32-04 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 100 µW - 2 W TDMA model		$2,680.00
NRVZ3205	Rohde & Schwarz NRV-Z32-05 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 100 µW - 2 W universal model		$2,520.00
NRVZ3303	Rohde & Schwarz NRV-Z33-03 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 1 mW - 20 W high speed model		$2,950.00
NRVZ3304	Rohde & Schwarz NRV-Z33-04 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 1 mW - 20 W TDMA model		$2,910.00
NRVZ402	Rohde & Schwarz NRV-Z4-02 Power sensor 50 Ohm 100 kHz - 6 GHz, 100 pW - 20 mW N-connector male, 1.3 m (4 ft) cable		$1,660.00
NRVZ403	Rohde & Schwarz NRV-Z4-03 Power sensor 50 Ohm 100 kHz - 6 GHz, 100 pW - 20 mW N-connector male, 5 m (16 ft) cable		$1,840.00
NRVZ502	Rohde & Schwarz NRV-Z5-02 Power sensor 50 Ohm 100 kHz - 6 GHz, 10 nW - 500 mW N-connector male, 1.3 m (4 ft) cable		$2,140.00
NRVZ503	Rohde & Schwarz NRV-Z5-03 Power sensor 50 Ohm 100 kHz - 6 GHz, 10 nW - 500 mW N-connector male, 5 m (16 ft) cable		$2,420.00
NRVZ5102	Rohde & Schwarz NRV-Z51-02 Thermal power sensor 50 Ohm 0 - 18 GHz, 1 µW - 100 mW N-connector male, 1.3 m (4 ft) cable		$1,700.00
NRVZ5104	Rohde & Schwarz NRV-Z51-04 Thermal power sensor 50 Ohm 0 - 18 GHz, 1 µW - 100 mW N-connector male, thermal isolated		$2,140.00
NRVZ52	Rohde & Schwarz NRV-Z52 Thermal power sensor 50 Ohm 0 - 26.5 GHz, 1 µW - 100 mW 3.5 mm male, 1.3 m (4 ft) cable		$2,060.00
NRVZ53	Rohde & Schwarz NRV-Z53 Thermal power sensor 50 Ohm 0 - 18 GHz, N-connector 100 µW - 10 W		$2,680.00
NRVZ54	Rohde & Schwarz NRV-Z54 Thermal power sensor 50 Ohm 0 - 18 GHz, N-connector 300 µW - 30 W		$2,900.00
NRVZ55	Rohde & Schwarz NRV-Z55 Thermal power sensor 50 Ohm 0 - 40 GHz, 1 µW - 100 mW K (2.92 mm) male, 1.3 m cable		$2,530.00
NRVZ6	Rohde & Schwarz NRV-Z6 Power sensor 50 Ohm 50 MHz - 26.5 GHz, 400 pW - 20 mW PC 3.5 mm male, 1.3 m (4 ft) cable		$2,290.00

Rohde & Schwarz NRVD Dual Channel Power Meter Display Unit

Rohde & Schwarz NRVD
Dual Channel Power Meter Display Unit