<< Rohde & Schwarz Catalog
<< Rohde & Schwarz Vector Network Sensors

Rohde & Schwarz ZVL3-75
Vector Network Analyzer

Wide frequency range: 9 kHz to 3 GHz/6 GHz
Wide dynamic range: >115 dB, typ. 123 dB
Bidirectional test set: Display of all four S-parameters
75Ω version from 9 kHz to 3 GHz for TV/CATV
Performs sophisticated measurement tasks by offering network analysis, spectrum analysis, and power measurement in a single box
Digital communications standards
Compact size and low weight (<7 kg)
Shock-resistant housing and ergonomic carrying handle
Measure S-parameters as well as the output spectrum, ACP, and TOI without having to reconnect the device under test (DUT)
Switchover from network analyzer to spectrum analyzer can easily be effected via remote control
Convenient loading of instrument setups with pass/fail criteria from the hard disk or USB stick
NRP power sensor can be directly connected to the ZVL
Install hardware options as needed on-site in line with the plug and play concept
12V DC operation and internal battery
Connection for external monitor

ZVL3-75 Front Shown

ZVL3-75 Back Shown

Product Information
Datasheet	900 KB
Specifications	755 KB
Additional Content	455 KB
PDF Help

The ZVL is a compact, powerful, and future-proof network analyzer, and is therefore ideal for use in development, production, and service. It is the only instrument to combine the functions of a network analyzer, spectrum analyzer, and power meter in a single box, and will thus tremendously increase your work efficiency.

The ZVL combines a wide dynamic range and excellent measurement speed with versatile functionality. The segmented sweep, the multi-trace display, and the powerful marker and trace evaluation are only some examples of the functions that speed up measurement sequences and reduce tuning and measurement times. The price/performance ratio of the ZVL makes the instrument unique among the compact net-work analyzers in its class.

All-in-one Solution; Wide scope of functions

Offering excellent specifications and a wide range of functions at a favorable price, the ZVL is every development engineer's ideal network analyzer.

Wide dynamic range for characterizing filters of high rejection
High power-handling capability of its receivers for analyzing active devices
Integrated step attenuator for measurements on devices with up to 27 dBm output power
Compact size for optimal utilization of the work space
Simultaneous display of all relevant DUT parameters for fast tuning
Possible connection of an NRP power sensor for precise power measurement (FSL-K9 option
Optional spectrum analysis with the FSL scope of functions
- Channel and adjacent channel power measurement
- Measurement of occupied bandwidth
- CCDF measurement (amplitude statistics of signals)
- 20 MHz I/Q demodulation bandwidth
Other spectrum analysis options are in preparation

Specifications
Network Analysis
Frequency range		9 kHz to 3 GHz/6 GHz (typ. 5 kHz)
Measurement time (201 measurement points, full two-port- calibrated)		<75 ms
Data transfer (201 measurement points)		Via RSIB over 100 Mbit/s LAN: 1.5 ms
Dynamic range at 10 Hz measurement bandwidth		>115 dB, typ. 123 dB
Output power		>0 dBm, typ. +10 dBm
Measurement bandwidths		10 Hz to 500 kHz in 1/2/5 steps
Weight (without battery)		<7 kg (15.43 lb)
Number of channels, diagrams, and traces		>100 (Limited by RAM)
Number of measurement points per trace		2 to 4001
Operating system		Windows XP
Spectrum Analysis
Frequency range		9 kHz to 3 GHz/6 GHz
Frequency uncertainty		1 × 10-6
Frequency uncertainty With R&S FSL-B4 option		1 × 10–7
Resolution Bandwidths	Standard:	300 Hz to 10 MHz in 1/3 steps, 20 MHz at zero span
	With R&S FSL-B7 option:	(1 Hz) 10 Hz to 10 MHz in 1/3 steps
Video bandwidths		10 Hz to 10 MHz
I/Q demodulation bandwidth		20 MHz
SSB phase noise at 500 MHz		typ. –103 dBc (1 Hz), 10 kHz carrier offset
Displayed average noise level	Without preamplifier at 1 GHz:	<–140 dBm (1 Hz)
	With preamplifier at 1 GHz:	<–156 dBm (1 Hz), typ. –163 dBm (1 Hz)
IP3		>+5 dBm, typ. +12 dBm
Detectors		max/min peak, auto peak, RMS, quasi peak, average, sample
Level measurement uncertainty (95% confidence level)		<0.5 dB

Ordering Information
Model	Description	Buy Online	Price
ZVL375	Rohde & Schwarz ZVL3-75 Vector network analyzer, 2 ports, 9 kHz - 3 GHz, 75 Ohm		$20,500.00
Options
FSLB4	Rohde & Schwarz FSL-B4 OCXO reference frequency (SKU 1300.6008.02 )		$1,135.00
FSLB10	Rohde & Schwarz FSL-B10 GPIB Interface		$640.00
FSLB30	Rohde & Schwarz FSL-B30 DC power supply 12-28V		$680.00
FSLB31	Rohde & Schwarz FSL-B31 NiMH battery pack		$1,115.00
FSLB5	Rohde & Schwarz FSL-B5 Additional interfaces video/IF-output, power meter 28 VDC for noise source		$475.00
FSLB7	Rohde & Schwarz FSL-B7 Narrow resolution filters 10 Hz - 10 MHz		$330.00
FSLB22	Rohde & Schwarz FSL-B22 RF preamplifier gain 20 dB		$1,280.00
FSLK9	Rohde & Schwarz FSL-K9 Power sensor measurements with NRP		$640.00
RAM	Rohde & Schwarz RAM Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at both ends, N-connectors		$890.00
RAZ	Rohde & Schwarz RAZ Matching pad 50/75 0 Ohm, 0 MHz to 2700 MHz		$890.00
ZVLK1	Rohde & Schwarz ZVL-K1 Spectrum analysis function for ZVL3 and ZVL6		$7,315.00
ZRA	Rohde & Schwarz ZRA SWR bridge 50 Ohm, 40 kHz - 150 MHz, test port connector N-female		$1,290.00
ZRC52	Rohde & Schwarz ZRC SWR bridge 50 Ohm 40 kHz - 4 GHz, calibration standard incl. test port connector N female		$5,315.00
ZRC55	Rohde & Schwarz ZRC SWR bridge 50 Ohm, 40 kHz -4 GHz test port connector N-male, calibration standard included		$5,800.00
ZRC72	Rohde & Schwarz ZRC SWR bridge 75 Ohm 40 kHz - 2.5 GHz; cal standard included Test port connector N-female		$5,020.00
ZRC75	Rohde & Schwarz ZRC SWR bridge 75 Ohm, 40 kHz - 2.5 GHz test port connector N-male, calibration standard included		$5,460.00
ZVLK2	Rohde & Schwarz ZVL-K2 Distance to Fault Measurement		$2,040.00
ZVZ19124	Rohde & Schwarz ZV-Z191 RF Cable 50 Ohm; N(m) to N(m); DC to 18GHz, flexible, phase stable; 610mm (24in)		$890.00
ZVZ19136	Rohde & Schwarz ZV-Z191 RF Cable 50 Ohm; N(m) to N(m); DC to 18GHz, flexible, phase stable; 910mm (36in)		$1,010.00
ZVZ19224	Rohde & Schwarz ZV-Z192 RF Cable 50 Ohm; N(m) to PC3.5mm(m); DC to 18GHz, flexible, phase stable; 610mm (24in)		$980.00
ZVZ19236	Rohde & Schwarz ZV-Z192 RF Cable 50 Ohm; N(m) to PC3.5mm(m); DC to 18GHz, flexible, phase stable; 910mm (36in)		$1,240.00
ZVZ9125	Rohde & Schwarz ZV-Z91 Flexible Precision Cable 50 Ohm N(m)/N(m); DC to 18 GHz; 635mm (25 inch); 1 piece		$1,495.00
ZVZ9138	Rohde & Schwarz ZV-Z91 Flexible Precision Cable 50 Ohm N(m)/N(m); DC to 18 GHz; 965mm (38 inch); 1 Piece		$1,630.00
ZVZ9225	Rohde & Schwarz ZV-Z92 Flexible Precision Cable 50 Ohm; N(m)/3.5mm(m) DUT; DC to 18 GHz; 635mm(25 inch); 1 piece		$2,515.00
ZVZ9238	Rohde & Schwarz ZV-Z92 Flexible Precision Cable 50 Ohm; N(m)/3.5mm(m) DUT; DC to 18 GHz; 965mm(38 inch); 1 piece		$2,650.00
Optional Accessories
EVSZ6	Rohde & Schwarz EVS-Z6 Accessory for EVS300, FSL, ZVL protective hard cover		$115.00
FSHZ38	Rohde & Schwarz FSH-Z38 75 ohm matching pad N to BNC (female)		$530.00
FSLZ3	Rohde & Schwarz FSL-Z3 Soft carrying bag for R&S FSL series		$455.00
FSLZ4	Rohde & Schwarz FSL-Z4 Additional charger unit for FSL-B31		$210.00
NRPZ11	Rohde & Schwarz NRP-Z11 Average power sensor for universal use 10 MHz - 8 GHz, 200 pW - 200 mW		$3,175.00
NRPZ21	Rohde & Schwarz NRP-Z21 Average power sensor for universal use 10 MHz - 18 GHz, 200 pW 200 mW		$3,865.00
NRPZ22	Rohde & Schwarz NRP-Z22 Average power sensor 10 MHz - 18 GHz, 2 nW - 2 W for universal use		$4,090.00
NRPZ23	Rohde & Schwarz NRP-Z23 Average power sensor 10 MHz -18 GHz, 20 nW - 15 W for universal use		$4,475.00
NRPZ24	Rohde & Schwarz NRP-Z24 Average power sensor 10 MHz - 18 GHz, 60 nW - 30 W for universal use		$4,835.00
NRPZ81	Rohde & Schwarz NRP-Z81 Wideband Power Sensor 50MHz to 18GHz; 1nW to 100mW. 30MHz video bandwidth		$6,360.00
NRPZ91	Rohde & Schwarz NRP-Z91 Average power sensor 9 kHz - GHz, 200 pW - 200 mW		$3,710.00
NRPZ51	Rohde & Schwarz NRP-Z51 Thermal power sensor 0 - 18 GHz, 1 mu W - 100 mW		$2,640.00
NRPZ55	Rohde & Schwarz NRP-Z55 Thermal power sensor 0 - 40 GHz, 1 mu W - 100 mW		$4,050.00
ZCAN52	Rohde & Schwarz ZCAN Calibration kit, type N, 50 Ohm, 0 - 3 G precision load, short/open and through N-male and N-female		$3,475.00
ZCAN72	Rohde & Schwarz ZCAN Type N calibration kit 75 Ohm, 0 - 3 GHz		$3,475.00
ZVZ12102	Rohde & Schwarz ZV-Z121 Calibration Kit N, 50 Ohm, Male. Open, Short, Match, Through combination, 0 Hz to 8 GHz		$1,100.00
ZVZ12103	Rohde & Schwarz ZV-Z121 Calibration Kit N, 50 Ohm, Female. Open, Short, Match, Through combination, 0 Hz to 8 GHz		$1,100.00
ZVZ21	Rohde & Schwarz ZV-Z21 Calibration kit N, 50 Ohm TOSM 0 - 18 GHz		$3,320.00
ZVZ235	Rohde & Schwarz ZV-Z235 Calibration Kit 3.5mm, 0Hz to 26 GHz, Open, SHort, Match, through m/F each		$9,920.00
ZVZ32	Rohde & Schwarz ZV-Z32 Calibration kit 3.5mm with fixed matches 0 - 26.5 GHz, incl. DCV	Discontinued See: ZVZ235
ZVZ33	Rohde & Schwarz ZV-Z33 3.5mm calibration kit with sliding matches 0 - 26.5 GHz certificated acc.		$17,460.00
ZZAS334	Rohde & Schwarz ZZA-S334 Adapter for BW2000 3HU 3/4 cabinet with impact protection		$485.00

Rohde & Schwarz ZVL3-75Vector Network Analyzer

Rohde & Schwarz ZVL3-75
Vector Network Analyzer