Ridgid K-60SP-SE
Compact Sectional Drain Cleaning Machine w/A-61 Tool Kit and A-62 Cable Kit

  • A compact machine for institutional, commercial or residential cleaning
  • Ideal for septic tank vacuum truck operators
  • Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
  • Ideal for rooftop vent stacks
  • Rear handle allows for easy transporting up ladders and onto rooftops
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control
    • Push handle down, cable spins at 600 RPM
    • Release handle, cable stops instantly, no overrun to kink or damage cable
  • Simple adjustment knob allows unit to spin both 7/8" (22mm) and 5/8" (16mm) diameter cable. Adjusts in seconds
    • 7/8" cable (C-10) cleans 2" to 4" lines through 150 feet
    • 5/8" cable (C-7, C-8, C-9) cleans 11/4" to 4" lines through 125 feet
  • Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
  • Equipped with 1/2 HP motor
  • CSA approved
  • Approved to UL standards (NRTLC)
Click for larger image of the RIDGID 66497 K-60SP-SE Sectional Drain Cleaning Machine w/A-1 Mitt, A-12, A-60-12, A-61 and A-62Click for larger image
Ridgid K-60SP-SE Shown
Product Information
Manual 557 KB PDF
PDF HelpPDF Help

The RIDGID K-60SP-SE (66497)is a portable Drain Cleaning Machine designed to clean 1-1/4″ to 4″ drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks.

The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor.

The K60SPSE is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP-SE to use both 5/8″ and 7/8″ sectional cable.

Ordering Information
Model Description Buy Now Price
MFR ID: 66497
RIDGID 66497 K-60SP-SE Sectional Drain Cleaning Machine w/A-1 Mitt, A-12, A-60-12, A-61 and A-62 Buy Now Sale $1,789.13
(Reg. $2,033.10)
Related Products
MFR ID: 66492
RIDGID 66492 K-60SP Sectional Drain Cleaning Machine w/A-1 Mitt, A-12 Pin Key, & A-60-12 Guide Hose Buy Now Sale $1,394.14
(Reg. $1,584.25)
Included Accessories
  • 1 - Operation Manual
  • 1 - Pair of Gloves
  • 1 - A-1 Operator’s Mitt
  • 1 - A-60-12 Rear Guide Hose
  • 1 - A-62 Cable Kit Includes:
    • 1 - 8 Cable Carrier
    • 1 - Five Sections Of C-10, 7/8" Cable, Total 75 Feet
  • 1 - A-61 Tool Kit, includes:
    • 1 - T-101 Straight Auger
    • 1 - T-102 Funnel Auger
    • 1 - T-107 Spade Cutter
    • 1 - T-125 Retrieving Auger
    • 1 - T-150-1 Sharktooth Cutter
    • 1 - A-3 Tool Box
    • 1 - A-12 Pin Key
    • 1 - T-125 Retrieving Auger