Ridgid K-60SP-SE

Sectional Drain Cleaning Machine for 1 1/4 in. to 4 in. Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, and A-60-15 Rear Guide Hose, 115V

66497
K-60SP-SE
66497

Ridgid K-60SP-SE

Sectional Drain Cleaning Machine for 1 1/4 in. to 4 in. Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, and A-60-15 Rear Guide Hose, 115V

66497
K-60SP-SE
66497

The RIDGID K-60SP-SE is a Sectional Drain Cleaning Machine with A-61 Tool Kit, A-62 Cable Kit, and Rear Guide Hose (115V). Driven by a 1/2 HP motor, it has an integral GFCI, toggle switch for FOR/OFF/REVERSE control. The cable is manually fed and rotates at 600 RPM. The clutch handle controls cable rotation. An adjustment knob allows both 5/8" and 7/8" sectional cable.

  • For cleaning 1 1/4" to 4" drain lines
  • Instant-acting cable clutch maximizes control
$2,525.64 Price $2,870.05
In stock: 1 Units
  • Designed for cleaning 1 1/4" to 4" drain lines
  • Suitable for institutional, commercial or residential cleaning
  • Ideal for septic tank vacuum truck operators
  • Excellent for rooftop vent stacks: rear handle allows for easy transporting up ladders and onto rooftops
  • Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
  • Remove only two bolts to access belt drive or jaw set for cleaning or replacement
  • Simple adjustment knob allows unit to spin both 7/8" and 5/8" diameter cable:
    • 7/8" cable (C-10, included) cleans 2" to 4" lines through 150 feet
    • 5/8" cable (C-7, C-8, C-9 - all sold separately) cleans 1 1/4" to 4" lines through 125 feet
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
    • Pull handle down and cable spins at 600 RPM
    • Release handle, cable stops instantly
  • Equipped with 1/2 HP motor
  • Approved by CSA to CSA and UL Standards
  • Voltage: 115V

The RIDGID K-60SP-SE (66497) Sectional Drain Cleaning Machine for 1 1/4" to 4" Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, and Rear Guide Hose (115V) is a portable drain cleaning machine designed to clean 1 1/4" to 4" drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. The rear handle allows for transporting up ladders and cleaning roof-top vent stacks.

The K-60SP-SE machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor.

The K-60SP-SE is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP-SE to use both 5/8" and 7/8" sectional cable.

More Information
Country of OriginUnited States
BrandRidgid
Catalog66497
ConditionNEW
UPC095691664976
Vendor Alias66497
  • 1 - 115V Sectional Drain Cleaning Machine
  • 1 - A-60-12 Rear Guide Hose
  • 1 - A-12 Pin Key
  • 1 - Drain Cleaning Mitt
  • 1 - A-61 Tool Kit:
  • 1 - T-101 Straight Auger
  • 1 - T-102 Funnel Auger
  • 1 - T-107 Spade Cutter
  • 1 - T-125 Retrieving Auger
  • 1 - T-150-1 Sharktooth Cutter
  • 1 - A-3 Tool Box
  • 1 - A-62 Cable Kit:
  • 1 - Five Sections of C-10 Cable, 7/8" x 15 ft. each (75 ft. total)
  • 1 - A-8 Cable Carrier