|
<< RIDGID Transmitters Index |
|
|
- The RIDGID Inductive clamp allows users to apply a signal to
a cable or pipe when connecting directly to the target conductor is
not possible.
- The clamp couples the transmitting signal onto the conductor
which then allows users to locate using a compatible receiver, such
as the 21893
SeekTech SR-20 Lightweight, Utility Line Locator or the
22163 SeekTech
SR-60 Pipe, Cable and Sonde Locator
- Two built in LED’s inform the user the clamp is functioning
properly.
- An integrated adapter allows users to attach a hotstick for
out of reach lines.
|
 
RIDGID 20973
Shown
|
|
|
|
The 20973 SeekTech Inductive Clamp allows users to apply a
signal to a cable or pipe when it is not possible to connect transmitter
leads directly to the target conductor. When its jaws are closed around
a cable or pipe, the clamp couples the transmitted signal onto the
conductor by induction. Once the signal is applied to a conductor, it
can be traced using a compatible receiver, such as the SeekTech SR-20.
The clamp should only be used on insulated conductors. When using
the clamp, the target conductor should be grounded at each end.
Otherwise, the signal may not be strong enough to locate. When applying
the clamp between two grounded points, the signal will only be on the
section between grounds (see Figure 1). The clamp may be used with
frequencies of 8kHz to 262kHz. |
|
|
|
Compatible Line Transmitters |
|
Image |
Model |
Type |
Description |
 |
ST-305 |
Utility/Cable |
5-Watt Utility Line Transmitter |
 |
ST-33Q |
Utility/Cable |
Seektech Long Range Line transmitter |
 |
ST-510 |
Utility/Cable |
10-Watt Utility Line Transmitters |
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| 20973 |
RIDGID 20973 Inductive Signal Clamp for SeekTech Systems |
 |
Sale $493.57
(Reg. $519.55) |
|
Included Accessories
|
| |
- 1 - User Manual
- 1 - Attached cable with Jack input
|
Included |
|
)
PDF
Help