HOME > RIDGID > ACCESSORIES > 20503 ridgid logo

RIDGID 20503
Inductive Signal Clamp for NaviTrack Systems
See also: RIDGID 20973 Inductive Signal Clamp for SeekTech Systems
Discontinued

  • The RIDGID Inductive clamp allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible.
  • The clamp couples the transmitting signal onto the conductor which then allows users to locate using a compatible receiver, such as the NaviTrack II Locator System and NaviTrack Scout Locator System
  • Two built in LED’s inform the user the clamp is functioning properly.
  • An integrated adapter allows users to attach a hotstick for out of reach lines.
Click here for a larger image - RIDGID 20503 Inductive Signal ClampClick here for a larger image - RIDGID 20503 Inductive Signal Clamp
RIDGID 20503 Shown


 
Product Information
Datasheet 343 KB PDF
Click here for Information Regarding PDF'sPDF Help
The 20503 NaviTrack Inductive Clamp allows users to apply a signal to a cable or pipe when it is not possible to connect transmitter leads directly to the target conductor. When its jaws are closed around a cable or pipe, the clamp couples the transmitted signal onto the conductor by induction. Once the signal is applied to a conductor, it can be traced using a compatible receiver, such as the Navitrack II.

The clamp should only be used on insulated conductors. When using the clamp, the target conductor should be grounded at each end. Otherwise, the signal may not be strong enough to locate. When applying the clamp between two grounded points, the signal will only be on the section between grounds (see Figure 1). The clamp may be used with frequencies of 8kHz to 262kHz.
Compatible Line Transmitters
Image Model Type Description
Click here for more info - RIDGID 20168 NaviTrack Brick 5 Watt Transmitter NaviTrack
Brick
Pipes/
Plumbing
NaviTrack Brick 5 Watt Transmitter
Click here for more info - RIDGID 14818 NaviTrack Line 10-Watt Transmitter 14818 Pipes/
Plumbing
NaviTrack Line 10-Watt Transmitter
 
Ordering Information
Model Description Buy Online Price
20503 RIDGID 20503 Inductive Signal Clamp for NaviTrack Systems Discontinued
Included Accessories
 
  • 1 - User Manual
  • 1 - Attached cable with Jack input

Included