Ramsey RSG1000B
RF Signal Generator Specifications

SPECIFICATIONS (At <= 0dbm output level)
Frequency Range:	100 KHz to 1100.00000 MHz
Resolution:	10 Hz continuous tuning, 100 Hz above 1000 MHz
Oscillator Frequency:	50 MHz TCXO
Oscillator Stability:	±0.1 ppm from 15° C to 35° C.
Spectral Purity Harmonics: Non-Harmonics:	-30 dbc, 500 KHz - 1100 MHz -50 dBc typical
Residual FM:	5 Hz typical, 0.3 to 3 KHz detection BW
Residual AM:	-60dBc (>10 KHz from carrier) 0.3 to 3 KHz detection BW
Output Level:	-130 to +10 dBm (50 Ohms); Resolution: 0.1 dB
Level Accuracy:	±1 dB (>500 KHz)
Level Units:	dBm, dBmV, mV, dBµV, µV
Reverse Power Protect:	25 watts, 50 VDC
Leakage:	1 µV (2 turn loop, 1 inch diameter, 1 inch distance)
Frequency Modulation
Range: Accuracy: Freq. Response: Max. Deviation: Range:	0 - 99.9 KHz in 0.1 KHz steps ±5% of scale 50 Hz to 25 KHz 99.9 KHz; except 250 to 500 MHz 50 KHz
Amplitude Modulation
Depth: Distortion: Accuracy: Frequency response:	0 - 75% in 1% steps less than 5% ±5% 50 Hz to 15 KHz
Modulation Sources	Internal 1 KHz derived from reference. External 600 ohm impedance Level LEDs to indicate correct 1 Volt p-p input level
Front Panel:	Sealed membrane with audio acknowledgment
Display:	Two line, green vacuum fluorescent display
RS-232:	RS-232 interface provides polled readout plus downloading and uploading of all front panel setups
Memory:	90 full front panel set-ups. 9 series of 10 memories each. 10 year retention
External Timebase Input:	10 MHz, 1 Volt p-p
Power Requirements:	90 to 230 VAC ±10%, 50/60 Hz
Dimensions:	12" x 6" x 12" (W x H x D)
Weight:	11 lbs

* * Ramsey Products are non-returnable. * *
Defective parts within a kit will be exchanged during the first 90 days.

Ramsey Catalog | Ramsey Price List

$20.00 Minimum on Total Order

Ramsey RSG1000B RF Signal Generator Specifications

Ramsey RSG1000B
RF Signal Generator Specifications