| The 7000 Series of LCR Meters is comprised of the
7400 and 7600. The 7400 has a frequency range from 10Hz to 500kHz.
The 7600 extends the frequency range to 2MHz. Any of 14 different
impedance parameters can be measured and any two parameters can be
displayed simultaneously to achieve coverage and flexibility not
previously available. Automatic Test Sequencing: Run up to
six different tests in sequence with a single push of the start
button. Each test can have different test conditions and limits.
Swept Measurements: Fast and accurate swept parameter
measurements, graphical or tabular, for verification of component
and material response to changes in ac test frequency, ac test
voltage or ac test current, without the need for complex programming
or an external controller.
Program and Data Storage: Test setups can be stored and
recalled either from internal memory or from standard DOS formatted
3 1/2" floppy disks. The front panel controls can be locked out,
with password protection, to insure procedures are run the same way
every time. Measured data can be stored on a floppy disk and then
transferred to PC for data reduction and analysis.
Load Correction: Substantially improves instrument
accuracy by performing measurements on a known standard and applying
the correction to subsequent measurements. Ideal for repetitive
testing of identical devices at like test conditions.
Automatic Calibration Procedure: The 7000 can be
calibrated without returning the unit to the factory using the NIST
traceable QuadTech Calibration Kit, reducing down time and
calibration costs.
Easy to Use: Large LCD graphics display and user friendly
menu driven interface allows the 7000 to be put on line quickly,
providing useful measurements by operators with little to no
training.
|
)
PDF Help