psiber LM35

Name: psiber LM35 LanMaster 35 Power and Link Tester for Installing and Maintaining Networks
Brand: psiber
SKU: LM35
Price: 349.0 USD
Availability: InStock

Our Part No. LM35

Mfr. Model LM35

Skip to the end of the images gallery

Skip to the beginning of the images gallery

psiber LM35

Our Part No. LM35

Mfr. Model LM35

Tests network cable pairs for Power over Ethernet (PoE)
Identifies the power type as IEEE 802.3af, Cisco Inline or non-standard
Simulates a network device for making power measurements under actual loaded conditions

Datasheet

$326.95 Price $349.00

This item ships FREE

Key Features

Tests network cable pairs for Power over Ethernet (PoE)
Identifies the power type as IEEE 802.3af, Cisco Inline or non-standard
Simulates a network device for making power measurements under actual loaded conditions
Displays voltage, polarity and mid-span or phantom configuration for powered wire pairs
Identifies damaged cables and bad punchdowns by measuring wiring Loop Resistance
Detects 10/100/1000 BaseTX Link speed and duplex mode
Measures cable length and open or short condition
Provides Port ID function (link light activation) for identifying connected ports
Applies a tone signal for tracing cables with the CT15 CableTracker Tone Probe
Ergonomic Design for one hand operation

Specifications:

Dimensions: 7.0 in x 13.2 in. x 1.4 in. (178 mm x 335 mm x 36 mm)
Weight: 9.0 ounces (250 grams)
Network Types: 1000baseTX, 100baseTX (IEEE 802.3u), 10baseT (Not for use with 100baseT4 equipment)
Power over Ethernet (PoE)
Power Supply: Four AA alkaline batteries (included)
Connector Type: One RJ-45
Cable Types: UTP/STP
Environment:

Operating Temperature: 32°F to 122°F / 0°C to 50°C
Storage Temperature: 14°F to 131°F / -10°C to 55°C

Details

The psiber LM35 is a LanMaster 35 Power and Link Tester for Installing and Maintaining Networks. The psiber LM35 LanMaster is a handheld tester used for installing and maintaining Local Area Networks (LAN) using Power over Ethernet (PoE).

The psiber LM35 LanMaster 35 Power and Link Tester conducts power tests with actual loads to ensure that when a powered device such as a VoIP phone, wireless access point or security camera is connected to the network it will operate properly; and the psiber LM35 measures cable length and can be connected to a wall outlet to identify a connected port on a switch or hub.

The psiber LM35 LanMaster 35 Power and Link Tester identifies whether power is IEEE 802.3af compliant or a legacy configuration, such as Cisco Inline power, for correctly connecting powered devices. The psiber LM35 LanMaster 35 Power and Link Tester provides link speed and duplex mode testing capabilities for verifying connectivity of a powered or unpowered 10/100/1000BaseTX Link. Additionally, the psiber LM35 LanMaster 35 Power and Link Tester measures Loop resistance to quickly identify damaged cables and bad punchdowns that cause intermittent problems or equipment malfunction.

More Information