|
Specifications |
|
Channels |
2 |
|
Bandwidth |
200MHz |
|
Rise Time |
1.8ns Approximately |
|
Input Impedance |
Resistance: 1M ±2% |
|
Capacitance: (20±5)pF |
|
Polarity |
Normal and Invert |
|
Maximum Input |
400V
(AC + DC Peak) |
|
Waveform Signal Process |
CH1±CH2,
CHlxCH2, CHlICH2, FFT |
|
Bandwidth Limit |
40MHz / -3dB |
|
Source |
CH1,
CH2, EXT., City Electricity |
|
Mode |
Edge, Pulse, Video, Slope Trigger |
|
Sensitivity |
Maximum 1 Div. (Frequency upper Limit to 40 MHz),
Maximum 2 Div., TV-V, TV-H, Video Trigger |
|
Ext. Trigger Input Impedance |
Resistance: 1Mohm ±2% |
|
Capacitance: (20±5)pF |
|
Ext. Trigger Sensitivity |
Maximum 100mVp-p (Frequency Support Limit to 40MHz) |
|
200mVp-p, TV-V, TV-H, Video Trigger |
|
Max. Input Voltage |
400V
(AC + DC Peak) |
|
Low Frequency Inhibition |
Frequencies Less Than 100Khz will be inhibited |
|
High Frequency Inhibition |
Frequencies Greater Than 100Khz will be inhibited |
|
Sampling |
Real-Time Max. Sampling Rate:
0 series is 500MSa/s, 1 Series is 1GSa/s |
|
Range (1-2-5 Increments) |
50s/div ~ 1ns/div |
|
Mode |
Main
Sweep, Main Sweep and Delay Expansion Sweep, X - Y |
|
X-Axis Input |
Channel 1 |
|
Y-Axis Input |
Channel 2 |
|
Phrase Shift |
Maximum 3 Degrees at 5MHz |
|
Voltage Measurement |
Vpp,
Vamp, Vrms, Vhi, Vlo, Vmax, Vmin, Pre-Shoot, Overshoot |
|
Time Measurement |
Frequency, Rise time, Fall time, Positive Width, Negative Width,
Duty Cycle |
|
Delay Measurement |
Delay 1 -> 2
 ,
Delay 1 -> 2
 |
|
Cursors Measurement |
Voltage Difference Between Cursors: Δ V |
| Time
Difference Between Cursors: Δ
T |
|
Frequency Difference Between Cursors: 1 Δ T |
|
TFT LCD Type |
5.7
Inch |
|
Display Resolution |
240
(Vertical) x 320 (Horizontal) Dpi |
|
RS232 Interface |
DB
9-Pin RS232 Interface |
|
USB |
USB
Host / Device 2.0 Full Speed Supported |
|
Line Voltage Range |
AC
100V ~ 240V ± 10%, 45Hz ~ 440Hz, Auto
Selection |
|
Battery Power Option |
Li-Ion Battery |
|
Dimensions |
300
x 150 x 130mm |
|
Weight |
2.5Kgs, 5.5lbs |
)
