| Specifications |
| Channels |
2 |
| Bandwidth |
100MHz |
| Rise Time |
3.5ns Approximately |
| Input Impedance |
Resistance: 1M ±2% |
| Capacitance:(20±5)pF |
| Polarity |
Normal and Invert |
| Maximum Input |
400V (AC + DC Peak) |
| Waveform Signal Process |
CH1±CH2, CHlxCH2, CHlICH2, FFT |
| Bandwidth Limit |
20MHz / -3dB |
| Source |
CH1, CH2, EXT., City Electricity |
| Mode |
Edge, Pulse, Video, Slope Trigger |
| Sensitivity |
Maximum 1 Div. (Frequency upper Limit to 40 MHz),
Maximum 2 Div., TV-V, TV-H, Video Trigger |
| Ext. Trigger Input Impedance |
Resistance: 1Mohm ±2% |
| Capacitance: (20±5)pF |
| Ext. Trigger Sensitivity |
Maximum 100mVp-p (Frequency Support Limit to 40MHz) |
| 200mVp-p, TV-V, TV-H, Video Trigger |
| Max. Input Voltage |
400V (AC + DC Peak) |
| Low Frequency Inhibition |
Frequencies Less Than 100Khz will be inhibited |
| High Frequency Inhibition |
Frequencies Greater Than 100Khz will be inhibited |
| Sampling |
Real-Time Max. Sampling Rate:
0 series is 500MSa/s, 1 Series is 1GSa/s |
| Range (1-2-5 Increments) |
50s/div ~ 5ns/div |
| Mode |
Main Sweep, Main Sweep and Delay Expansion Sweep, X - Y |
| X-Axis Input |
Channel 1 |
| Y-Axis Input |
Channel 2 |
| Phrase Shift |
Maximum 3 Degrees at 5MHz |
| Voltage Measurement |
Vpp, Vamp, Vrms, Vhi, Vlo, Vmax, Vmin, Pre-Shoot, Overshoot |
| Time Measurement |
Frequency, Rise time, Fall time, Positive Width, Negative Width, Duty Cycle |
| Delay Measurement |
Delay 1 -> 2
 ,Delay 1 -> 2
|
| Cursors Measurement |
Voltage Difference Between Cursors: Δ V |
| Time Difference Between Cursors: Δ V |
| Frequency Difference Between Cursors: 1 Δ T |
| TFT LCD Type |
5.7 Inch |
| Display Resolution |
240 (Vertical) x 320 (Horizontal) Dpi |
| RS232 Interface |
DB 9-Pin RS232 Interface |
| USB |
USB Host / Device 2.0 Full Speed Supported |
| Line Voltage Range |
AC 100V ~ 240V ± 10%, 45Hz ~ 440Hz, Auto Selection |
| Battery Power Option |
Li-Ion Battery |
| Dimensions |
300 x 150 x 130mm |
| Weight |
2.5Kgs, 5.5lbs |
)
