| Protek Z8900 Specifications |
| Measurements |
| Resistance |
Measured Parameter |
R+Q |
| Measurement Range |
R: 0.0001Ω to 99.99MΩ
Q: 0.0001 to 9999 |
| Impedance |
Measured Parameter |
Z+ Θ |
| Measurement range |
Z: 0.0001Ω to 99.99MΩ
Θ: -179.99º to 179.99º |
| Inductance |
Measured Parameter |
L+Q and L+R |
| Measurement Range |
L:1μH to 9999H (100Hz and 120Hz
0.1μH to 999.9H (1KHz)
0.01μH to 99.99H (10KHz)
Q: 0.001 to 9999
R: 0.0001Ω to 99.99MΩ |
| Capacitance |
Measured Parameter; |
C+D and C+R |
| Measurement Range |
C: 1pF to 19,999μ (100Hz and 120Hz);
0.1pF to 199.9 μF (1KHz)
0.01pF to 19.99 μF (10KHz)
D: 0.0001 to 9.999
R: 0.0001Ω to 99.99MΩ
|
Test
Environment |
Test Voltages |
0.1V, 0.3V and 1V |
| Test Voltage Accuracy |
±10% |
| Test Frequencies |
100Hz, 120Hz, 1KHz and 10KHz |
| Test Frequency Accuracy |
±0.02% |
| Measurement Rates |
Fast: 12 Measurement/Sec
Medium: 5Measurements/Sec
Slow: 2.5Measurements/Sec |
| Output Impedance |
30Ω and 100Ω |
| Trigger |
Auto and Manual |
Measurement
Accuracy |
Basic Accuracy |
±0.1% (See manual for accuracy conditions) |
| Calibration |
Zero input correction: Open and Short Circuit |
| Remote operation |
RS232 and Handler interfaces |
| Display |
Display type |
320 x 240 pixel with backlight |
| Displayed Value |
5 digit, dual display of L, C, R or Z and Q, D or Θ |
| Parameters Displayed |
Measured value, ∆ absolute, and ∆% |
General
Specifications |
Power Requirements |
220V or 110V 50/60Hz switch selected |
| Power consumption |
≤ 20 watts |
| Operating Temperature |
10ºC to 30ºC (50ºF to 86ºF)@≤70%R.H. |
Dimensions
(H x W x D) |
13" x 6" x 15.7" |
| Weight |
7.7lbs |
)
PDF Help