|
Output Characteristics |
| Waveforms |
Sine, Square, Triangle, Ramp, Pulse,
Sawtooth, TTL Leveled Square |
| Frequency Range |
Sine wave: 0.2Hz to 20MHz
Square & Triangle wave: 0.2Hz to 10MHz
Range selection in 8 ranges (1,10,100,1K,10K,100K,1M,10M) |
| Output Level |
20 ±1 Vp-p in open circuit
10 ±0.5 Vp-p into 50W Load |
| Attenuator |
20dB fixed and continuously variable
(20dB) |
| Impedance |
50W ±0.5% |
| Frequency
Accuracy |
±5% of full scale |
|
Waveform Characteristics |
| Sine Wave |
Flatness: ±3dB to 20MHz
Distortion: Less than 1.5% at 0.2Hz to 100KHz
Duty error: Less than 10% in 50:50 |
| Square Wave |
Rise and Fall Time : Less than 25nS
at 10MHz |
| Triangle Wave |
±0.2dB: 0.01Hz to 100KHz |
| Sine Wave |
±0.2dB: 0.01Hz to 100KHz |
| TTL Output |
Rise and Fall Time: Less than 25ns
at 10MHz
TTL Level: H ³ 2.4V, L
£ 0.4V |
| Symmetry
Variation |
Sine & Square; 80:20 to 20:80 at
0.2Hz to 2MHz
Triangle; 80:20 to 20:80 at 0.2Hz to 1MHz |
|
Sweep Characteristics |
| Mode |
Linear |
| Width |
Variable from 1:1 to 10:1 |
| Rate |
0.5Hz to 50Hz (20ms to 2s) |
| External VCF
Input |
Input Voltage: 0 to 10V
Input Impedance: Approx. 10KW |
|
Frequency Counter |
| Display |
8 digits Green LED, Overflow, Gate
time, MHz, KHz, Hz |
| Frequency Range |
Input A : 0.1Hz to 100MHz, Input C :
80MHz to 3.0GHz |
| Accuracy |
±Timebase Error ±1 count |
| Low pass Filter |
-3 dB, 100KHz |
| Timebase |
10MHz TCO, 1 ppm |
| Input
Sensitivity |
Input A: 30mVrms(0.1Hz to 80MHz),
70mVrms(80MHz to 100MHz)
Input C: 20mVrms(80MHz to 2.0GHz), 70mVrms(2.0GHz to 3.0GHz with
RG58 cable), 40mVrms(2.0GHz to 3.0GHz with RG400 cable) |
| Max. Input
Voltage |
Input A: 35 Vp-p, Input C: 3Vrms |
| General Specifications |
| Power Requirements |
115 or 230 VAC ±10%, 48 to 66 Hz |
| Operating Temperature |
0 to 40°C (Accuracy specified at 23
±5°C) |
| Size |
3.5" H x 9.5" W x 11.0" D |
| Weight |
6.6 lbs |
| Supplied
Accessories |
Manual, Line cord, BNC cable |
)
