HOME > PIE > MULTIFUNCTIONAL > 820-ELITE pie logo

PIE 820-ELITE
Multifunction Diagnostic Process Calibrator

  • Lighten up your toolbox
  • Technician friendly operation
  • Use it as a milliamp and voltage calibrator
  • Calibrate directly in temperature (°C and °F)
  • Simulate pH probes into transmitters & analyzers
  • Checkout flow and vibration systems
  • Troubleshoot loop and wiring problems
  • LED for optical pickups
  • Quickly set any three outputs plus automatic stepping and ramping
  • Quickly set any three outputs plus automatic stepping & ramping
  • Measure temperature sensors, frequency pickups, loop currents and voltage levels
  • Loop Diagnostics
  • More Thermocouple & RTD ranges with 0.1° resolution and better accuracy
  • See also: PIE 820 Multifunction Process Calibrator
Click here for a larger image of PIE 820-ELITEClick here for a larger image - PIE 820
PIE 820-ELITE Shown

Product Information
Datasheet 1.56 MBPDF
Manual 3.18 MBPDF
Click here for Information Regarding PDF'sPDF Help
The PIE 820-ELITE Multifunction Diagnostic Process Calibrator packs the power of six single function calibrators into one surprisingly small package. The perfect complement to any technician's toolbox, the PIECAL 820 combines advanced features, ease of use, accuracy, signal compatibility and compact size to make it the best value multifunction calibrator on the market today.

The PIE 820-ELITE Multifunction Diagnostic Process Calibrator combines all milliamp loop functions and sources and reads DC Volts and millivolts, 14 thermocouple types, 9 RTD curves, ohms and process frequency signals. For troubleshooting connections it has a continuity tester with tone. All ranges have auto storing MIN/MAX readings and three output set points for fast calibration of zero, midpoint and span. Advanced features include automatic detection of 2, 3 and 4 wire RTDs plus configurable automatic stepping and ramping. A LED flashes green for frequency sync and lights up red for signal overload and invalid signal conditions.

PIE 820-ELITE is the world’s first multifunction calibrator that detects current leaks in loops and has the highest accuracy in its class.

The technician friendly PIE 820ELITE Multifunction Diagnostic Process Calibrator is all about ease of use. An intuitive EZ-DIAL Double Click Menu makes it simpler to setup than larger calibrators with their complicated button filled panels and confusing menus. Use the PIECAL 820-ELITE right out of the box instead of wasting time learning to use more complex calibrators. The toolbox tough design includes a backlit display for use in dark environments and protective rubber boot with built in stand.
Specifications
General
Operating Temperature Range -20 to 60 °C (-5 to 140 °F)
Storage Temperature Range -30 to 60 °C (-22 to 140 °F)
Relative Humidity Range 10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing
10 % ≤RH≤ 70 % (35 to 60 °C), Non-condensing
Normal Mode Rejection 50/60 Hz, 50 dB
Common Mode Rejection 50/60 Hz, 120 dB
Size 5.63 x 3.00 x 1.60 in, 143 x 76 x 41mm (LxWxH)
Batteries Four “AA” Alkaline 1.5V (LR6)
Protection against misconnection Over-voltage protection to 135 vrms (rated for 30 seconds) or 240 vrms (rated for 15 seconds)Red LED indicates OVERLOAD or out of range conditions
Display High contrast graphic liquid crystal display with 0.315” (8.0 mm) high digits. LED backlighting for use in low lit areas.
Read mA
Ranges and Resolution 0.00 to 24.00 mA or -25.0 to 125.0% of 4-20 mA
Accuracy ≤ ± (0.02 % of Reading + 0.003 mA)
Voltage burden ≤ 2V at 24 mA
Overload/Current limit protection 25 mA nominal
Battery life ≥ 125 hours nominal; ≥ 100 hrs with backlight on
Source mA / Power & Measure Two Wire Transmitters
Ranges and Resolution 0.00 to 24.000 mA or -25.0 to 125.00% of 4-20 mA
Accuracy ≤ ± (0.03 % of Full Scale)
Loop compliance voltage ≥ 24 DCV @ 20.00mA
Loop drive capability 1200 Ω at 20 mA for 15 hours nominal;
950 Ω with Hart Resistor enabled
Voltage Read
Ranges and Resolution 99.999 mV, ±999.99mV, 0 to 10.250 V, 0.00 to 60.00 V DC
Accuracy ≤ ± (0.02 % of Reading + 0.01% Full Scale)
Input resistance ≥1 MΩ
Source V dc
Ranges and Resolution 20.000 to 99.999 mV, -500.00 to 999.99 mV, 0.000 to 10.250V
Accuracy ≤ ± (0.02 % of Reading + 0.01% Full Scale)
Source Current ≥ 24 mA
Output Impedance < 1 Ohm
Short Circuit Duration Infinite
Sink Current > 16 mA
Thermocouple Source
Accuracy ≤ ± (0.02 % of Reading + 0.01 mV)
Cold Junction Compensation ± (0.1°C + 0.01%/°C)
Output Impedance < 1 Ohm
RTD, OHMS and Continuity Read
Resistance Ranges 0.00 to 401.00, 0.0 to 4010.0 Ohms
Accuracy ±(0.02% of Reading + 0.075 Ohms)
Excitation Current 1.0 mA to 401 Ohms, 0.5 mA to 4010 Ohms (nominal)
Continuity 0.0 to 401.0 Ohms; Beeps from 0.0 to 100.0 Ohms
Frequency Source
Ranges 1 to 2000 CPM, 0.01 to 999.99 Hz, 0.1 to 9999.9 Hz, 0.001 to 20.000 kHz
Accuracy ±(0.02% of Reading + 0.01% of Full Scale)
Output Waveform Square Wave, Zero Crossing -1.0 to +5 V peak-to-peak ±10%
Risetime (10 to 90% of amplitude) < 10 microseconds
Output Impedance < 1 Ohm
Short Circuit Duration Infinite
Source Current > 1 mA rms at 20 kHz
Ordering Information
Model Description Buy Online Price
820-ELITE PIE 820-ELITE Multifunction Diagnostic Process Calibrator   Buy Now $2,499.00
Included Accessories
  • 4 - AA Alkaline Batteries
  • 1 - Blue Rubber Boot
  • 1 - NIST Traceable Calibration Certificate
  • 1 - Evolution Hands Free Carrying Case
  • 1 - Test Leads
  • 1 - Evolution RTD Wire Kit (2 Red & 2 Black Leads w/ Banana Plugs & Spade Lugs)
Included
Optional Accessories
020-0103 Piecal 020-0103 NiMh Charger - 120 VAC/12V DC/60 Hz and 4 AA Batteries for Calibrator model 434  Buy Now $80.00