Phone 800-517-8431
HOME > PIE > CALIBRATORS > THERMOCOUPLE-CALIBRATORS > THERMOCOUPLE-CALIBRATOR-SOURCE-ONLY-520B-PIE-TYPE-P-RW

PIE 520B-P-RW

Single Thermocouple Calibrator, Source Only, Configured for Type P, 3 Year Warranty

Brand: PIE
Model No: 520B-P-RW
Our Model No: 520BTYPEPRW
Condition: NEW
PDF Document Icon Data Sheet (1.68 MB)
520B-P-RW

$815.00

Add to Cart

Product Features:

  • 3 year repair warranty
  • Configured to Type P
  • Accuracy ±(0.015% of mV Setting + 0.009mV)
  • Calibrate in temperature for your T/C type
  • Adjustable temperature output in selectable 1°C or 1°F steps
  • Typical accuracy of ±0.35°C (0.5°) for Type K
  • EZ-Dial knob easily adjust output by °C or °F with 1.0° resolution
  • Three position EZ-Check switch for 0% and 100% span adjustments
  • Uses standard AA Alkaline Batteries
  • Superior battery life of 45 hours under typical continuous usage
  • Easy access to battery compartment
  • Lightweight and Rugged with a Solid Feel
  • Small and tough
  • Protected to 60V

The Practical Instrument Electronics (PIE) PIECAL 520B (Type P-RW) Thermocouple Simulator simulates a dedicated standard thermocouple curve over the entire industrial temperature range for type P-RW. The PIE 520B (Type P-RW) provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. PIECAL 520B (Type P-RW) is cold-junction compensated for changes in ambient temperature. The PIE 520B (Type P-RW) offers the highest performance and functions in its class by exceeding the accuracy and functions of many higher priced thermocouple calibrators.

The low cost PIE Model 520B (Type P-RW) is an "easy as PIE" to use thermocouple source for checkout and calibration of all thermocouple instruments in the field, shop or control room.

Easy to use: With the PIECAL 520B (Type P-RW) you can check & calibrate all your thermocouple instruments. Connect via a miniature thermocouple jack on the top end of the source. Use your own thermocouple wire connectors or order one of the wire kits for easy operation out of the box.

Take it into the shop, plant or field: Carry it without worry - protect it with an optional rubber boot and rugged, low profile switch. Easy to operate even in the dark areas of the plant with the backlit display.

Calibrate directly in temperature (°C & °F): Stop carrying around a millivolt source and thermocouple tables. The PIE 520B (Type P-RW) works with the thermocouples you use. Easily set any value quickly to within 0.1° with the adjustable digital potentiometer "DIAL" plus store any three temperatures for instant recall with the EZ-CHECK switch. Or calibrate from -13.000 to +80.000 mV.

Compatible with ALL process instruments: Connect directly to the thermocouple inputs of smart transmitters, PLCs, DCS and multichannel recorders and verify their outputs or displays. Works with older instruments and newer multichannel instruments that switch between input channels.

Evolutionary design: The PIE 520B (Type P-RW) improves upon other brands by including backlit display with larger digits, rugged switches and a battery compartment for fast battery changes. Add an optional rubber boot with tilt stand for extra protection on the plant floor or in the field.

  • 4 - AA Batteries
  • 1 - Evolution RTD Wire Kit (2 Red & 2 Black Leads w/ Retractable Shield Banana Plugs & Spade Lugs)
  • 1 - NIST Traceable Calibration Certificate
  • 1 - 3-Year Repair/Replacement Warranty
Data Sheet: PDF Document Icon (1.68 MB)
Manual: PDF Document Icon (923 KB)
↑ Back to Top