The Phase II SRG-4500 surface roughness testers profilometer, will instill the highest level
of confidence in your production, shop floor or QC lab. Extended memory and output coupled with
multiple useful functions the Phase 2 SRG4500 surface roughness tester profilometer is clearly
the new leader in ultra accurate surface profile testing.
The Phase II+ SRG-4500 surface roughness testers profilometer is distinguished by a high
level of accuracy, multiple parameters and simplicity of operation. Extremely sensitive and
highly accurate readings from this Phase II surface roughness tester profilometers are offered
via 15 popular surface roughness scales including Ra, Rq (Rms), Rt, Rz and Rmax.
The diamond stylus is hypersensitive and sophisticated enough to allow for a .001 (um) micron display resolution.
Additionally, the Phase 2+ SRG 4500 surface roughness tester profilometer can utilize an easy interface to allow for changes of in/mm (uin/um), cutoff length, sampling length, parameters, level of test(stylus position), digital filters and more! Measurement results are displayed as large characters on the LCD screen for easy recognition.
||Measures flat, Inside, Outside Diameters and sloping surfaces
|Measures grooves and recessions
||wider than 0.16in (4mm)
|Surface Roughness parameters
||Ra, Rz, Ry, Rq, Rt, Rp, Rs, Rv, Rsm, Rmax, Rm, R3z, Rsk, Rpc, Rmr
|Surface Roughness standards
||Less than or equal to 6%
||Ra, Rq: 0.01-40µm
Rz,Ry,Rp,Rt,R3z, Rm: 0.02-160µm
Sm, S: 2-4000µm
|Maximum drive range
||speed 1mm/s (sampling length 2.5mm)
speed 0.5mm/s (sampling length 0.8mm),
speed 0.135mm/s (sampling length 0.25mm)
||Diamond, radius 5µm
|Pick up Force
||(119 x 47 x 65mm)
||Li-Ion rechargeable battery