This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Phabrix PHQX01-IP
Qx 1U 1/2-Rack Hybrid Broadcast Analyzer, 3G, IP/SDI
PHQX01IP
PHQX01-IP
Phabrix PHQX01-IP
Qx 1U 1/2-Rack Hybrid Broadcast Analyzer, 3G, IP/SDI
PHQX01IP
PHQX01-IP
- SMPTE 2022-6 IP generation and analysis
- SPMTE ST 2022-6 encapsulation/de-encapsulation
- Inter Packet Arrival Time Analysis for monitoring network congestion
- Packet transmission provides 2022-6 IP signal generation, and allows creation of packet interval timing distribution profiles to simulate IP network congestion conditions
- Network management multicast support (IGMP2,3)
- 3G/HD-SDI generation and analysis
- Simultaneous generation and analysis
- Waveform monitoring for YRGB/YUV monitoring
- Vectorscope for checking colour bias / conformity
- Test patterns, including 3G Pathological
- Video and audio monitoring
- REF locking and timing analysis
- HDR/WCG generation and analysis
- Dolby PQ HDR supported (HLG and SLOG3 standards with future upgrade)
- CIE chart (Rec. 709 and Rec. 2020)
- HDR Heat-map highlights signals beyond SDR
- HDR test pattern generator
- Waveform (log scale to 10,000 NIT) with Wide Colour Gamut support
- System Features
- Logging
- Configuration presets
- Control
- TCP/IP based control
- Automation port for remote control and automated testing
- Form factor
- Compact 1/2 RU
- Air filter option for live production
- Field Upgrades
- 12G/6G SDI standards
- SMPTE ST 2059-2 (PTP)
- TR03, AES67, SMPTE ST 2110
- SMPTE 2022-6 IP tools
- Inter Packet Arrival Time Analysis
- Packet interval timing histogram for monitoring network congestion
- Packet counts mapped against arrival time (μS)
- Packet transmission interval timing to test impact of infrastructure on IP stream
- IP Packet transmission
- Instrument provides 2022-6 IP signal generation
- Creates different packet interval timing distribution profiles to simulate IP network congestion conditions
- IP network analysis
- Transmission and receive traffic analysis
- Monitoring packet types and sizes
- HDR (Dolby PQ) / WCG tools
- CIE chart
- CIE 1931 X Y chromacity plot
- Rec. 709 and Rec. 2020 support
- Overlay shows Gamut boundaries
- HDR Heat-map
- Highlighting 'heat map' above SDR 709, where HDR is impacting brightness
- NIT level scale, with upper/lower thresholds
- Cursors
- HDR waveform monitor
- Wide Colour Gamut support for Rec. 2020
- PQ scale to 10,000 NITs
- Pan and zoom
- YCbCr, YRGB, RGB
- 3G/HD signal analysis tools
- Vectorscope
- 12-bit processing
- Magnification (0.5x to 4x)
- 75% and 100% targets
- 5% +/-5 degress boxes
- IQ axis on/off, perimeter rose, brightness, gamma, raw, persistence, low pass and interpolate trace modes
- Signal generation
- 3G signal generation, including pathological test patterns for stress testing
- Audio monitoring
- 32 channel audio monitoring
- Input selection of audio groups
- Metering Ballistics options include PPM Type I, PPM Type II, Vu and VuFr
- Audio pair phase meters
- Stereo pair and mono monitoring
- ANC detect and ancillary status
- Colour coded signal conditions for present, lost, and error
- Toolset to edit DID and SDID values
The PHQX01-IP Qx IP from Phabrix delivers all the key tools for hybrid IP, 3G-SDI and HDR broadcast environments, and it's ideal for infrastructure compliance testing and content monitoring.
Single, hybrid device for IP, 3G/HD and HDR
With Qx IP, you no longer need multiple test and measurement devices for SMPTE 2022-6 IP, SDI and HDR / WCG. A single Qx IP can perform signal generation, analysis and monitoring across all these important formats. TR03, AES67 and PTP (ST 2059-2), as defined in the draft SMPTE 2110 specification, will be supported with upcoming software releases.
Single device for IP, 4K/UHD and HDR
With the PHQX01IP Qx IP, you no longer need multiple test measurement devices for IP, SDI and HDR / WCG. A single Qx IP can perform signal generation, analysis and monitoring across SMPTE 2022-6 IP and HD, 3G, 6G and 12G-SDI formats. TR03, AES67 and PTP (ST 2059-2), as defined in the draft SMPTE 2110 specification, will be supported with upcoming software releases.
Ideal for live production
Highly compact and ultra-quiet, Qx IP weighs less than 2 Kg and uses just 50 W. This makes it well suited to live production applications. A flexible, easy to use control interface provides unlimited instrument layering, and is designed for fast moving operation. For challenging environments, Qx IP can be fitted with a replaceable air filter.
| Brand | Phabrix |
|---|---|
| Condition | NEW |
| Vendor Alias | PHQX01-IP |
