| Specifications |
| Bandwidth |
200MHz |
| Sample rate(Real time) |
2GS/s (1GS/s for dual channels) |
| Horizontal Scale(S/div) |
1ns/div~100s/div, step by 1~2~5 |
| Rise time (at input,
typical) |
≤1.7ns |
| Channels |
Dual channels + external trigger |
| Display |
8”color display with TFT panel (640×480 pixels),
65535 colors |
| Input impedance |
1MΩ±2%in parallel with
15pF±5pF |
| Isolation between channels |
50Hz (100:1) 10 MHz (40:1) |
| Max. input voltage |
400V (DC + AC PK-PK) |
| DC gain accuracy |
±3% |
| Probe attenuation factor |
1X, 10X, 100X, 1000X |
| DC accuracy(Average) |
Average≥16:±(3%
reading+0.05div) for ΔV |
| Probe attenuation factor |
1X, 10X, 100X, 1000X |
| LF respond(AC, -3dB) |
≥5Hz(at input) |
| Record length |
Max.2M points on each channel |
| Sampling rate/relay time accuracy |
±100ppm |
| Interpolation |
(sin x)/x |
| Interval(ΔT) accuracy (full bandwidth) |
Single: ±(1 interval
time+100ppm×reading+0.6ns)
Average>16:±(1 interval
time+100ppm×reading+0.4ns) |
| Input coupling |
DC, AC, Ground |
| Displacement |
±50V(500mV-5V); ±2V(5mV-200V) |
| Vertical resolution (A/D) |
8 bits resolution (2 Channels simultaneously) |
| Vertical sensitivity |
2mV/div～10V/div(at input) |
| Trigger type |
Edge, Pulse, Video, Slope, Alternate |
| Trigger mode |
Auto, Normal, Single |
| Trigger level |
±6 divisions from screen center |
| Acquisition modes |
Sample, Peak Detect and Average |
| Line/field frequency(Video) |
Support standard NTSCPAL and SECAM broadcast
systems |
| Cursor measurement |
ΔV and ΔT between cursors |
| Waveform Math |
＋, －, ×, ÷, FFT |
| Waveform storage |
4 waveforms |
| Communication interface |
USB2.0, USB flash disk storage |
| Cymometer |
Available |
| Power supply |
100V-240V AC, 50/60Hz, CATII |
| Power consumption |
≤15W |
| Fuse |
1A, T class, 250V |
)
PDF Help