| Specifications |
| Bandwidth |
200MHz |
| Sample rate(Real time) |
2GS/s (1GS/s for dual
channels) |
| Horizontal Scale(S/div) |
1ns/div~100s/div, step by 1~2~5 |
| Rise time (at input,
typical) |
≤1.7ns |
| Channels |
Dual channels +
external trigger |
| Display |
8.0" color LCD, TFT
screen, 640×480 pixels, 65535 colors |
| Input impedance |
1MΩ±2%, in parallel with
15pF±5pF |
| Channels Isolation |
50Hz: 100 : 1, 10MHz: 40
: 1 |
| Max. input voltage |
400V (DC + AC
PK-PK) |
| Record length |
Max.2M points |
| Probe attenuation factor |
1X，10X，100X，1000X |
| Interpolation |
(sin x)/x |
| Vertical resolution (A/D) |
8 bit (2 channels simultaneously) |
| Vertical sensitivity |
2mV/div～10V/div(at input) |
| DC gain accuracy |
±3% |
| DC accuracy(Average) |
Average>16:±(3% reading+0.05div) for ΔV |
| Acquisition modes |
Sample, Peak Detect and Average |
| Trigger type |
Edge, Video, Alternate, Pulse, Slope |
| Cursor measurement |
ΔV and ΔT between cursors |
| Waveform Math |
＋, －, ×, ÷, FFT |
| Waveform storage |
4 waveforms |
| Trigger mode |
Auto, Normal, Single |
| Communication interface |
USB, Support USB Flash Disk Storage |
| Cymometer |
Available |
| Power supply |
100V-240V ACRMS, 50/60Hz, CATII |
| Fuse |
1A, T grade , 250V |
| Logic Analyzer Characteristics |
| Sample rate (real time) |
20S/s-400MS/s |
| Bandwidth |
66MHz |
| Threshold voltage |
±10V (4 settings) |
| Input signal range |
±15V |
| Channels |
16 |
| Record length |
4M/channel |
| Input impedance |
1MΩ±2% |
| Trigger position setting |
pre-trigger, mid-trigger, re-trigger |
| Trigger mode |
Edge trigger, Bus trigger, Pattern trigger,
Sequential queue trigger, Data width trigger, Distributed queue
trigger |
| Data System |
Binary system, Decimal system, Hex |
| Data search |
Available |
| Digital filter |
0, 1, 2 optional |
| Storage setting |
10 settings |
|
)
PDF Help