| << Oscium Catalog |
Oscium WiPry-Spectrum
2.4 to 2.495 GHz, 1 MHz Bandwidth Spectrum Analyzer
for the iPad, iPhone, and iPod touch |
|
Oscium designs test equipment you want to get your ‘hands on’. We leverage the intuitive features and touchscreen technology
found in the iOS family of products (iPad, iPhone, iPod touch) making test equipment easier to use than ever. With the Oscium
WiPry-Spectrum 2.4 to 2.495 GHz, 1 MHz Bandwidth Spectrum Analyzer, your iPad Tablet, iPhone, and iPod touch now becomes a
powerful test equipment tool that you can use on-the-go. WiPry Spectrum
Analyzer enables you to visualize real-time radio frequency
signals in the 2.4GHz ISM band. The Oscium WiPry-Spectrum is perfect for detecting open WiFi channels and identifying unauthorized
WiFi access points. WiPry-Spectrum adds yet another tool to your "iOS Test" toolbox.
|
 |
| |
| 1. Wireless Internet Problems? |
 |
2. Visualize The Fix |
|
3. Identify & Avoid Interference |
| It is now easier than ever to find a clear channel on the 2.4-2.5GHz band. If you’re accessing the internet through a busy channel, there can be interference. Internet packets collide and have to be re-routed, slowing down your internet access. |
The Oscium WiPry-Spectrum enables you to visualize an otherwise invisible network environment. It’s an accessory that plugs into the charging port of your iPhone, iPod touch, or iPad. Now, the touchscreen display visualizes the fix. |
The Oscium WiPry-Spectrum WiPry-Spectrum allows you to identify polluters and avoid noisy channels in the 2.4GHz range. Your internet connection will be faster and more reliable. ‘Pry’ into your network today, eliminate unnecessary interference. |
|
| |
Fully Configurable Real-time Views on the Oscium WiPry-Spectrum
The Oscium WiPry-Spectrum's real-time view has a variety of useful features such as average waveform, max hold, raw wave, heat map, and
more. These features can be enabled and disabled on the Oscium WiPry Spectrum Analyzer depending on what you want to do! The colorful
display leverages the OpenGL display on your iOS device. In the screenshot to the right, max hold is outlined (in blue) along with
identifiers showing the five peak signal amplitudes across the spectrum. The raw wave is also displayed within the colors and thresholds
of the touch coloring bubbles on the far right side panel. Arrows indicate the current peak signals with color indicating the amplitude
(also matching the coloring bubbles). In the picture, you can clearly see WiFi on the left side as the wide band and a single DSSS
transmission as the narrow spike on the right. |
| |
Oscium WiPry-Spectrum's Waterfall View
The waterfall view shows RF activity as frequency over time with data moving from the top of the screen toward the bottom. The Oscium
WiPry-Spectrum is perfect for analyzing frequency hopping systems and other protocol related phenomenon.
Measurements on the Oscium WiPry Spectrum Analyzer can be enabled to identify rows are displayed over the horizontal and vertical cursors
with the color of the arrow indicating the intensity of the signal peaks (with red arrows indicating the greatest intensity). Once activated,
these markers track up to five peaks along each axis, giving you the ability to visualize RF activity between 2.4GHz and 2.495GHz with the
Oscium WiPry-Spectrum Analyzer.
Real-time Wave -> Additional Features
The real-time view of the Oscium WiPry-Spectrum can be adjusted to give you the optimal view for your specific task. In the sample picture
on the right, we see raw RF spectrum activity as the colored waveform. Decay data is also shown as the light grey waveforms in the background.
Waveform colors can be adjusted by clicking on the color tab.
When cursors are activated in this view real-time dynamic measurements are displayed in either mW or dBm for each of the active waveforms.
The red and blue bubbles on the right side allow you to set the real-time waveform coloring. This is extremely useful for setting viewable
thresholds. A quick double tap of the screen allows you to leverage the simple touch interface and also to see the cursor measurements, graph
amplitudes, and graph frequencies.
|
| |
| Specifications |
| Frequency Range: |
2.400 to 2.495 GHz |
| Antenna: |
External with SMB |
| Amplitude Range: |
-40dBm to +20dBm |
| Amplitude Resolution: |
2.0dBm |
| Resolution Bandwidth: |
1MHz |
| Sweep Time: |
200ms |
|
| |
|
Supported Platform
The Oscium WiPry-Spectrum is compatible with all generations of the iPod Touch, iPhone, and iPad devices running iOS version 3.1.3 or higher.
Test drive the software for free by downloading WiPry from the Apple App Store. Three distinct products are available under the WiPry brand:
WiPry-Spectrum, WiPry-Power, andWiPry-Combo. Once
hardware is connected, the system will automatically recognize and enable the appropriate functionality.
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| WIPRYSPECTRUM |
Oscium WIPRY-SPECTRUM 2.4 to 2.495 GHz, 1 MHz Bandwidth Spectrum Analyzer for the iPad, iPhone, and iPod touch |
 |
$99.97 |
| Included Accessories |
|
- 1 - 30 pin Dock Connector
- 1 - 2.4GHz - 2.5 GHZ Antenna
|
Included |
|
)
)
)
)
)
)
PDF Help
800-517-8431