Onset BHW-PRO-DLD

HOBOware Pro Graphing and Analysis Software for PC & Mac, Download Only

BHWPRODLD
BHW-PRO-DLD

Onset BHW-PRO-DLD

HOBOware Pro Graphing and Analysis Software for PC & Mac, Download Only

BHWPRODLD
BHW-PRO-DLD
  • Brand Name: Onset
  • Condition: NEW
This product is available for shipping to the US, Canada, and Puerto Rico only.
$75.00
  • Support for HOBO U-Series Data Loggers - Launch, readout, status, export, and more
  • Support for HOBO RX3000-Series Data Loggers - Initial setup of WiFi or Ethernet units
  • Support for HOBO U30 and H21, HOBO Micro Stations, and HOBO Energy Loggers - Launch, readout, status, export, Data assistants, and more
  • Support for HOBO Conductivity, Dissolved Oxygen and Water Level Loggers - Launch, readout, status, export, data assistants, and more
  • Configure HOBO FlexSmart Modules - Configure modules for H22 Energy Logger or U30 Station
  • Support for HOBO U-Shuttle and HOBO Waterproof Shuttle - Data shuttle is pocket-sized device that can be used to offload/restart multiple data loggers and transport data back to your personal computer, allowing loggers to stay in place for continuous monitoring/recording
  • File Support for HOBO H-Series Loggers - Open .DTF BoxCar file
  • Multi-Language Support - English (United States), simplified Chinese and traditional Chinese (China), French (France), German (Germany), Japanese (Japan), Portuguese (Portugal), Spanish (Spain), Korean (South Korea)
  • Firmware Upgrade Tool - Automatically detects when new firmware file is available for UX series data loggers and walks you through update process
  • Launch Supported Loggers - In order to set up logger to record data, you must specify several parameters and launch, or start, logger
  • Launch Time-Saving Options - By default, HOBOware Pro displays launch window when you initiate launch; if you want to skip launch window and launch logger with default settings, choose "automatically launch"; this is particularly useful for launching many loggers quickly without changing settings
  • Check Logger Status and View Current Readings - Status window displays current status of logger
  • Filters Extract Key Series Information at Launch - As part of launch setup, you can create filtered series that automatically calculates additional values, such as maximum, minimum, average, or total, for set interval upon readout of logger; saves you time of manually filtering data for each series after readout
  • Scaling at Launch - Convert raw logger data to measurement units; linear and pulse scaling are avaiable from Launch Screen
  • Readout and Open-File Time-Saving Options - Allows you to skip number of default actions when reading out logger (such as being prompted to saving or Plot Setup window)
  • Save (Project) Changes - Project file (.hproj) is plot that you have customized using various features and tools of HOBOware; when you open project files, plot appears as it did when you saved them and contains all of associated data
  • Export Preferences - Easily customize date and time format, file type and other format options
  • Export Directly to .CSV, .TXT or .XLS (Excel) Format - Export datasets to CSV, TXT or XLS file
  • Bulk Export Tool - Bulk Export Tool plug-in for HOBOware Pro exports HOBOware files to text or Microsoft Excel format for use in other programs; particularly helpful for exporting multiple files at once
  • Import Text Data - Import and graph non-HOBOware data in certain text files
  • Copy Graph to Clipboard - Copy graphs so they can be used in other programs, such as Microsoft Power Point or Word programs
  • Graphing - Easily displays recorded data series in plot
  • Setting Properties - Set preference for series, axis and plots
  • Graph Labels - Add multiple labels to graph to identify specific points or call attention to regions of graph
  • Zooming, Panning, and Smart Scaling Plots - Adjust viewing area of plot by zooming, panning, and smart scaling
  • Pie Charts - Pie charts for loggers with state series to view, print, and save as .png files; helpful for light and occupancy data from UX90-005x and -006x loggers
  • Copy Series - Copy series from one plot to another, allowing you to to combine synchronous and asynchronous data sets
  • Overlaying Series - Compare data with different time axis
  • Cropping a series - Remove data from series by changing time frame; crop one or multiple series in single plot
  • Merging Data Files - Combine multiple data files from deployment into single file; note that only series of same types and names can be merged and there cannot be an overlap in series time
  • Filters to Extract Key Series Information - Calculate additional values, such as maximum, minimum, average, or total, over time frames; for example, calculate Total On Time per Hour or Day
  • Subset Statistics Tool - Select range of data in graph, and display maximum, minimum, average and standard deviation for measurements within that range
  • Dissolved Oxygen Data Assistant - Correct for measurement drift from fouling and provides salinity-adjusted DO concentration as well as percent saturation data
  • Conductivity Data Assistant - Easy conversion to specific conductance and salinity and enables start/end-point calibration to compensate for any fouling
  • Growing Degree Days Data Assistant - Measurement of growth potential given historical temperature data; can be measure of crop or pest maturity, given input parameters
  • Grains Per Pound Data Assistant - Also known as Humidity Ratio or Mixing Ratio, Grains Per Pound is measure of mass in grains of H2O in otherwise dry air
  • Barometric Compensation Data Assistant - Compensates water level measurements for barometric pressure using HOBOware or text barometric files
  • Linear Scaling Data Assistant - Convert raw logger data to measurement units
  • Pulse Scaling Data Assistant - Convert data recorded from third-party pulse output sensors to actual measurement units
  • kWh Assistant - Converts logged pulse to kWh, average kW, and energy cost with WattNode, Veris, or other energy transducers
  • 21 CFR Part 11 Compliance - Document explaining Onset's position on 21 CFR
  • HOBOnode Manager for ZW Data Nodes - HOBOnode Manager is the software tool within HOBOware Pro for setting up and managing a ZW wireless data network, which consists of a receiver, data nodes, and router nodes
  • Logging and Connection Intervals - Adjust recording and connection intervals (1 minute is quickest)
  • Labels - Applies labels to Data Nodes and individual sensors for easier data management
  • Groups - Apply Group Labels to Data Nodes for easier data management when exporting and plotting recorded data
  • Scaling - Convert raw logger data to measurement units for 3rd party sensors
  • Real-Time Plots - In plots window, you can view sensor data in real-time plots
  • Device Table - Display information about receiver and each node and configured sensor in your network including labels, battery status, signal strength, latest measurments, and alarm status
  • Network Map - Place icons on Network Map to help keep track of devices; expand information balloons on device to view status information and sensor readings; also import custom background images, such as floor plans
  • Alarms - There are two types of alarms in HOBOnode Manager: sensor alarms and system alarms; sensor alarms let you set alarms to trip when sensor reading is out of specified range; system alarms trip when node is missing from network or has low battery
  • Plotting and Export Data - Using Plot/Export Wireless Data capability, plot data directly in HOBOware or export to text or .csv file to open in another program for further analysis; pinpoint exact data you wish to plot or export, which allows you to view data from current and/or previous network deployments, specific data nodes, subsets of certain sensors from selected data nodes, groups of data nodes as configured in HOBOnode Manager, and specific date ranges or timeframes
  • Automated Data Delivery - Automatically save recorded sensor data from nodes in your network to single .txt, .csv, or .xls file on regular schedule; store data from your current data node network deployment for future reference and analysis or access data remotely when you are away from the network by sending it automatically to FTP site, email address or Network drive on your Local Area Network
  • HOBOnode Viewer - View plots and data from your HOBO data node network on your Local Area Network with HOBOnode Viewer
More Information
BrandOnset
ConditionNEW