Onset UX120-017

Name: Onset UX120-017 HOBO 4-Channel Pulse Data Logger
Brand: Onset
SKU: UX120017
Price: 240.0 USD
Availability: InStock

Our Part No. UX120017

Mfr. Model UX120-017

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Onset UX120-017

Our Part No. UX120017

Mfr. Model UX120-017

The Onset UX120017 HOBO 4-Channel Pulse Data Logger combines the functionality of four separate loggers into one compact unit. Suited for use by energy management professionals, building energy consumption, equipment runtimes, and water or gas flow rates can all be easily tracked.

Max Pulse Rate: 120 Hz
Pulse Input Range: 0 - 24VDC
Stores up to over 500,000 measurements which enables longer deployments with fewer site visits

This product is available for shipping to the US, Canada, and Puerto Rico only.

Datasheet

$240.00

This item ships FREE

Key Features

NOTE: This product requires HOBOware software (USB interface cable included with BHW-PRO-CD purchase, ONLY)
Simultaneously measures and records pulse signals, events, state changes, and runtimes
Stores up to over 4 million measurements, enabling longer deployments with fewer site visits
Maximum pulse rate: 120 Hz
Pulse input range: 0 to 24VDC
Streamlines deployment via range of start/stop options, logger status LEDs, and high-speed USB 2.0 data offload
Works with Onset's Energy and Power Meter to measure Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more
Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis
Inputs:
External Contact Input: Electronic solid state switch closure or logic driven digital signals to 24 V
Maximum Pulse Frequency: 120 Hz
Maximum State, Event, Runtime Frequency: 1 Hz
Bits: 4-32 bits depending on pulse rate and logging interval
Maximum Pulses Per Interval: 7,863,960 (using maximum logging rate)
Driven Logic Signal: Input Low: ≤ 0.4 V; Input High: 3 to 24 V
Absolute Maximum Rating: Maximum Voltage: 25 V DC
Minimum Voltage: -0.3 V DC
Solid State Switch Closure: Input Low: < 10 KΩ; Input High: > 500 KΩ
Internal Weak Pull-Up: 100 KΩ
Input Impedance: Solid state switch closure: 100 KΩ pull up; Driven signal: 4.5 KΩ
Minimum Pulse Width: Contact closure duration: 500 uS; Driven logic signal: 100 uS
Lockout Time: 0 to 1 second in 100 ms steps
Edge Detection: Falling edge, Schmitt Trigger buffer
Preferred Switch State: Normally open or Logic "1" state
Resolution: Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
Logging Rate: 1 second to 18 hours, 12 minutes, 15 seconds
Time Accuracy: ± 1 minute per month at 25°C (77°F)
Battery Type: Two AA alkaline or lithium batteries
Battery Life: 1 year, typical with logging intervals greater than 1 minute and normally open contacts
Memory: 520,192 measurements (assumes 8-bit)
Download Type: USB 2.0 interface
Download Time: 30 seconds
Operating Range: Logging: -40° to 70°C (-40° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
Environments: For use in indoor environments
Measurements: AC Voltage, Amp Hour (Ah), Amps (A), Event, Kilowatt Hours (kWh), Kilowatts (kW), Motor On/Off, Power Factor (PF), Pulse Input, Runtime, State Open/Closed, Volt-Amp Reactive, Volt-Amp Reactive hour, Volt-Amps (VA), Volts (V), Water Flow, Watt Hours (Wh) and Watts (W)

Details

The Onset UX120-017 HOBO 4-Channel Pulse Data Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals - from energy auditors to building commissioners - to easily track building energy consumption, equipment runtimes, and water and gas flow rates.

Note: UX120-017 requires the HOBOware software (free to download) to operate. Please also note that a USB interface cable comes with the purchase of a HOBOware Pro CD (BHW-PRO-CD), only.

More Information