Onset MX1102

Name: Onset MX1102 HOBO CO2/Temperature/Relative Humidity (RH) Data Logger
Brand: Onset
SKU: MX1102
Price: 595.0 USD
Availability: InStock

Our Part No. MX1102

Mfr. Model MX1102

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Onset MX1102

Our Part No. MX1102

Mfr. Model MX1102

NOTE: This product requires HOBOware software (USB interface cable included w/BHW-PRO-CD purchase, ONLY)
Wireless communication via Bluetooth Smart
Six-month battery life at 5-minute CO2 logging rate

This product is available for shipping to the US, Canada, and Puerto Rico only.

Datasheet

Replaced with:

Onset MX1102A

Key Features

NOTE: This product requires HOBOware software (USB interface cable included w/BHW-PRO-CD purchase, ONLY)
Wireless communication via Bluetooth Smart
Six-month battery life at 5-minute CO2 logging rate
Easy to deploy and offload using free HOBOmobile App
Visual and audible high & low alarm thresholds
Self-calibrating CO2 sensor technology ensures optimal accuracy at lower maintenance costs
Environments: The MX1102 Data Logger is for use in Indoor environments
Measurements: Carbon Dioxide, Relative Humidity, Temperature
Temperature Sensor
Range: 0 deg. to 50 deg. C (32 deg. to 122 deg. F)
Accuracy: ±0.21 deg. C from 0 deg. to 50 deg. C (±0.38 deg. F from 32 deg. to 122 deg. F)
Resolution: 0.024 deg. C at 25 deg. C (0.04 deg. F at 77 deg. F)
Drift: <0.1 deg. C (0.18 deg. F) per year
RH Sensor
Range:
1% to 70% RH when CO2 sensor is enabled (non-condensing)
1% to 90% RH when CO2 sensor is disabled (non-condensing)
Accuracy: ±2% from 20% to 80% typical at 25 deg. C (77 deg. F)
Hysteresis: ±2% RH
Resolution: 0.01% at 25 deg. C (77 deg. F)
Drift: <1% per year typical
CO2 Sensor
Range: 0 to 5,000 ppm
Accuracy: ±50 PPM ±5% of reading at 25° C, less than 70% RH and 1013 mBar
Warm-up Time: 15 seconds
Calibration: Auto or manual to 400 ppm
Non-linearity: <1% of FS
Pressure Dependence: 0.13% of reading per mm Hg (corrected via user input for elevation/altitude)
Operating Pressure Range: 950 to 1,050 mbar (use Altitude Compensation for outside of this range)
Compensated Pressure Range: -305 to 5,486 m (-1,000 to 18,000 ft)
Sensing Method: Non-dispersive infrared (NDIR) absorption
Response Time
Temperature: 12 minutes to 90% in airflow of 1 m/s (2.2 mph)
RH: 1 minute to 90% in airflow of 1 m/s (2.2 mph)
CO2: 1 minute to 90% in airflow of 1 m/s (2.2 mph)
Logger
Radio Power: 1 mW (0 dBm)
Transmission Range: Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard: Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)
Logger Operating Range: 0 deg. to 50 deg. C (32 deg. to 122 deg. F); 0 to 95% RH (non-condensing)
Logging Rate: 1 second to 18 hours
Logging Modes: Fixed interval (normal, statistics) or burst
Memory Modes: Wrap when full or stop when full
Start Modes: Immediate, push button, date & time, or next interval
Stop Modes: When memory full, push button, date & time, or after a set logging period
Time Accuracy: ± 1 minute per month at 25 deg. C (77 deg. F)
Power Source: 4 AA 1.5 Volt batteries (user replaceable) or USB power source (5 V DC, 2 Watts)
Battery Life: 6 months, typical with logging and sampling intervals of 5 minutes or slower; 6 months or less with logging and sampling intervals faster than 5 minutes while logging CO2. Entering burst logging mode will impact battery life. With HOBOmobile use, battery life can be reduced by remaining connected, excessive readouts, checking of Full Status Details, audible alarms, and paging. Visual/audible alarms and other events can have a marginal impact on battery life.
Memory: 128 KB (84,650 measurements, maximum)
Download Type: USB 2.0 interface or via Bluetooth Smart
Full Memory Download Time: 20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger
LCD: LCD is visible from 0 deg. to 50 deg. C (32 deg. to 122 deg. F); the LCD may react slowly or go blank in temperatures outside this range
Size: 7.62 x 12.95 x 4.78 cm (3.0 x 5.1 x 1.88 inches)
Weight: 267.4 g (9.43 oz)
Environmental Rating: IP50

Details

The Onset HOBO MX1102 Bluetooth Smart-Enabled/CO2/Temperature/Relative Humidity Data Logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments. It measures CO2 from 0 - 5,000 parts per million (ppm) - and our free HOBOmobile app allows you to access data right from your mobile phone or tablet within a 100-foot range.

The MX1102 also features a USB port so it can be used with a computer running HOBOware Pro graphing and analysis software.

Note: MX1102 data loggers require the HOBOware software (free to download) to operate. Please also note that a USB interface cable comes with the purchase of a HOBOware Pro CD (BHW-PRO-CD), only.

More Information