OK International BVX-203
Pre-Gas/Deep bed Gas, 100-240 VAC Filter unit for 2 stations

• Powerful, but low noise unit
• Does not require any form of external ducting or compressor
• Portable fume extraction unit can use two 50 mm fume extraction hoses at once or one larger Omni flex hose (63mm diameter)
• Up to two users can use this unit at the same time without significant loss of suction power
• By using a 'pre-filter' with the Main filter, users can cut down the cost of maintaining and replacing filters
• Two filter configurations available; Useful for either Heavy Soldering or Light Dust
• LED Light indicator tells user when filters require a replacement

The OK International BVX-203 Series Fume Extraction Systems are revolutionary two-arm units that combine powerful fan performance with efficient filtration, quiet operation and complete portability. They can be placed under or next to the bench-top and fitted with either two 50mm (2") diameter BVX arms or one 63mm (2.5") diameter Omniflex arm.

Using the proven fan motor of the the OKi BVX-100 Series, the BVX 203 Series Fume Extraction Systems, the BVX-201 Series Fume Extractions Systems add a proprietary one-stage impeller design that doubles the total free-blowing airflow.

The result is a maximum free-blowing airflow of 250m3/h (150cfm), with a maximum suction force of 850 Pa (3.5"WC). This suction force provides ample capability in reserve to handle any clogging that may occur during the normal life of the filter. It is, in fact, the suction rating for this unit is one of the best in its class offered for such compact and portable systems.

The OKi BVX203 Fume Extraction System is designed mainly for solder fumes and incorporates both pre- and main-filters which can be changed independently to maximize the working life of each filter and lower the total cost of ownership. The main filter has a HEPA efficiency of 99.97% at 0.3 micron, plus an activated carbon filter to remove additional gases.

The rate of performance is based on the condition of the filters. The BVX-203 now has a filter monitoring feature. This audible alarm will inform the operator when the extraction rate drops below the recommended efficiency level.

Most fume extraction units are situated at floor level under a bench, which makes turning the system on and off a difficult operation. To overcome this, the BVX-200 Series comes with a remote on/off switch. This switch can be placed within reach, where the operator can power the system on and off.