Test Equipment Depot Top Nav Bar


	\|

Test Equipment Catalog

Specials

Repair

Surplus

Ordering/Contact Info

OKi Catalog | OKi Price List

<< OK International Desoldering Systems Index

OK International MFR-DSI
Desoldering System with Internal Air Sources

Provides superior thermal transfer to the joint
SmartHeat technology makes through-hole Desoldering easy and safe
Power Supply comes with a built-in Air pump
MFR-HDS Desoldering Iron can be adjusted from a pencil to a gun with a simple press of a button
Low cost maintenance
Paper solder collection chamber and filter system is quick and easy to change

OK International
MFR-DSI Shown

Product Information
MFR Brochure	645 KB
Manual	720 KB
PDF Help

The OK International MFR-DSI Desoldering Systems provides superior thermal transfer to the joint, effectively reflowing the solder and then quickly and efficiently removing all solder. The MFR-DSX system requires shop air for desoldering. SmartHeat technology makes through-hole Desoldering easy and safe from board damage. The state-of-the-art hand-piece can be adjusted from a pencil to a gun with a simple press of a button. Operators can find the most comfortable and efficient position to tackle the rework challenge. The paper solder collection chamber and filter system is quick and easy to change, and provides low cost maintenance.

Specifications
Function		Description
Ambient Operating Temperature		10- 40°C
Maximum Enclosure Temperature		55°C
Input Line	Voltage	100- 240 VAC, grounded circuit
	Frequency	50/60 Hz
Power Consumption		90 Watts maximum
Output Power		50 Watts max. at 22°C ambient temperature
Output Frequency		450 KHz
Power Cord 3-Wire		183cm (72")
Power Supply Dimensions (W x D x H)		7" x 8" x 6" (170mm x 200mm x 152mm)
Agency Tested Per		IEC 60335-2-45 and UL499, FCC CFR Part 15
Tip-to-Ground Potential		< 2mV
Tip-to-Ground Resistance		< 2 ohms
Idle Temperature Stability		± 1.1°C in still air
Hand-piece Cable	Length	71cm (48")
	Burn Proof	Yes
	ESD Safe	Yes
Connector		8-pin power connectors
Replacement Tips for Included Hand Piece		More Info On Available Desoldering Tips >>
Workstand Dimensions (W x D x H)		4" x 8" x 4" (100 mm x 200 mm x 100 mm)
Noise Level		Less than 70dBA
Vacuum Suction Force		22" Hg at Vacuum pump (at sea level)

Ordering Information
Model	Description	Buy Online	Price
MFRDSI	Ok International MFR-DSI System, MFR Desolder, Internal Pump		Sale $631.84 (Reg. $718.00)
Included Accessories (Kit does not include tips)
	1 - User Manual 1 - Two Port Universal Voltage Power Supply with Internal Air Pump (MFR-PS2K) 1 - Desolder Hand-piece (MFR-HDS) 1 - Desolder workstand (MFR-WSDS)	Included
Replacement Parts (included with system package)
MFRPS2K	Ok International MFR-PS2K Power Supply, MFR Switched, SDI/DSI, Internal Pump		Sale $403.92 (Reg. $459.00)
MFRHDS	Ok International MFR-HDS Handpiece, MFR Desolder with Cord		Sale $175.12 (Reg. $199.00)
MFRWSDS	Ok International MFR-WSDS Workstand, Desoldering Handpiece, Black		Sale $52.80 (Reg. $60.00)
Optional Accessories
ACCC	Ok International AC-CC Collection Chamber for Solder, MFR-HDS Handpiece		Sale $7.92 (Reg. $9.00)
ACPM1	Ok International AC-PM1 Pump W/ Motor Replacement Kit		Sale $79.20 (Reg. $90.00)
ACPR1	Ok International AC-PR1 Pump Rebuild Kit		Sale $35.20 (Reg. $40.00)
Replacement Tips
Tips	OK International Desoldering Tips	More Info>>>