| << OK International Hot Air Convention Stations |
OK International PCT-1000
Programmable Convection Rework Preheater
|
| |
- Adds heat capacity and enables lower process temperatures
- Increases through-put and reliability of soldering, desoldering
and SMD rework processes
- Four-zone programmable settings for time and temperature to create
optimum thermal profiles for varying application demands
- Storage for up to fifty users defined profiles for quick, easy set-up
- User selectable control of heating at source (internal) or at target (external)
- Controlled cool-down eliminates thermal shock to PCB and components
- System safety feature automatically shuts off heating when fan is stopped
- High efficiency vortex heater design maximizes ramp to temperature
for increased productivity
|
 
OK International
PCT-1000 Shown with BH1000
|
|
|
The OK International PCT-1000 is a programmable preheater that
provides users exceptional ability to increase heat capacity with highly
controlled thermal output. The preheater is ideal for aiding high
thermal demand applications including lead-free, multi-layer boards and
large ground planes. The OKI PCT 1000 can be used in a variety of processes
including soldering, desoldering, SMD rework operations and, with its
added heat capacity, will provide faster production rates while lowering
overall process temperatures.
With four programmable heating zones and one cooling zone, users select time and
temperature targets, creating a preheat thermal profile. The
OK-International PCT1000 features an
advanced heat control function where the temperature is controlled either at the
heater output (internal) or at the board (external). The "external" control function
uses a thermocouple which can be placed on the board or a component. The external control
function enables users to heat with high levels of assurance; preventing such
undesirable effects as underside component reflow, thermal shock to sensitive components
and damaging peak temperatures.
Four-zone thermal profiling with independent time and temperature control.
The OKi
PCT-1000 is equipped with the highly advanced heater design found on sophisticated OK
International rework systems. Its convection heater creates a vortex effect that
efficiently directs and concentrates heat. This, coupled with the precise feedback control
and thermal profiling capability, establish the PCT-1000 as a powerful, precise benchtop solution
for increasing productivity.
The PCT:1000 is easy-to-use with
clearly marked controls. The front panel features a 20 X 4 LCD display
and 3 input buttons. Step by step programming makes profile creation
simple and straight forward. The system stores up to 50 thermal profiles
plus one default start up profile.
While the PCT1000 can be used
with or without a board holder, users often need a quick and flexible
way to position a board over the preheater. The new BH-1000 board holder
consists of posts and rails and is a highly flexible system. It has two
sets of post-rail assemblies (two posts, one rail per assembly). Two
sliding clips are mounted on each rail and require minimal board-edge
space to clamp the board. The post-rail assemblies can be located as
close as 12 mm (1/2") to virtually any distance apart. Additionally,
each post-rail system can be converted to a stand-alone post-pin
configuration with removal of the rails and by adding the threaded pins
(shown right). These pins can be used for holding board tooling holes or
for board support. |
| |
|
Specifications |
|
Image |
Function |
Description |
 |
Power Consumption: |
350W |
|
Rated Power: |
1200W |
|
Input: |
100-240 VAC, 50/60 Hz |
|
Temperature Range: |
50° to 350°C |
|
Temperature Control: |
Type K Thermocouple feedback with users selectable source (internal) or
target (external) control External: includes two Type K inputs |
|
Air Flow: |
Fixed at 19cfm (538 l/minute) |
|
Programs: |
Storage for fifty (50) thermal profiles |
|
Max. time per zone: |
300 seconds |
|
Dimensions
(W x D x H) |
8.7" x 6.10" x 2.56" |
|
Weight |
1.6kg |
|
Certification/Approvals |
cTUVus, CE |
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| PCT1000 |
OK International PCT-1000 Digital PreHeater, 350W, Type-K T/C Kit |
 |
Sale $1,100.00
(Reg. $1,250.00) |
| Included Accessories |
| |
- 1 - User Manual
- 1 - Type-K T/C kit
- 1 - Foot Switch
- 1 - Power Cord
- 1 - Advanced User Guide
|
Included |
| Optional Accessories |
| BH1000 |
OK International BH-1000 Board Holder with 4 Posts, 2 Rails and Pins |
|
Sale $264.00
(Reg. $300.00) |
| BHPK1000 |
OK International BH-PK1000 Board Holder Pin Kit and Flat Head Screw |
|
Sale $22.00
(Reg. $25.00) |
| BHRK1000 |
OK International BH-RK1000 Board Holder Rail Kit, 2 Rails, and 4 Pins |
|
Sale $52.80
(Reg. $60.00) |
| BHSP1000 |
OK International BH-SP1000 Board Holder Support Post with Hight Adjustment |
|
Sale $70.40
(Reg. $80.00) |
| PCTFS1 |
OK International PCT-FS1 Foot Switch, PCT-1000 |
|
Sale $30.80
(Reg. $35.00) |
|
)
PDF Help