- Ideal tester for high voltage electrical and industrial applications
- Performs insulation resistance tests up to 2.5 kV with 200 Gigaohms maximum resistance
- Stabilized insulation test voltage remains within specification
- Guard terminal allows for high accuracy at higher voltages
- Adjustable insulation test voltage from 50 V to 2500 V
- Single range, faster continuity testing from 0.01 ohm to 1 Megaohm
- Provides clear readout on digital display with large characters and analog arc
- Offers PI, DAR, and timed test modes
- Detects live voltages and inhibits insulation testing above user-selected thresholds
- Buzzer limit alarms may be set for continuity and insulation tests
- Test lock function holds insulation test on continuously
- Rechargeable options for mains and car charging
- Suitable for use on CAT IV applications and supply voltages to 600 V
The Megger MIT2500 (1006-764) Insulation and Continuity Tester has been designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltages are needed.
The MIT2500 offers both fixed range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be "dialed in". This is supported by the test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under testing.
The MIT2500 uses a redesigned case, back-stand, and 6-cell battery compartment. The tester furthermore has an incorporated guard terminal to reduce surface tracking currents that reduce accuracy at higher voltages. The MIT2500 is over-molded for increased protection and to achieve an IP54 weatherproof rating.
|1007-637||Megger 1007-637 Replacement 2.50 kV Silicone Test Lead Set with Clips, Red/Black/Blue, for MIT2500||
|1007-781||Megger 1007-781 Replacement 1 kV Silicone Test Lead Set with Probes and Clips, Red/Black/Blue||
|1007-464||Megger 1007-464 Mains Charger Kit for Model MIT430/2||
|1004-183||Megger 1004-183 12V DC Battery Charger for Models MIT2500, MIT430/2, MIT485/2||
|1007-157||Megger 1007-157 SP5 Remote Switch Probe for MIT400/2 Series||
|1002-001||Megger 1002-001 Replacement 1.4m Test Lead Set (Red, Black) with Crocodile Clips for MIT Series||
|FPK8||Megger FPK8 (1002-015) FPK8 Fused 1.5m Test Lead Set (Red/Black) with Clips, 500 mA, for MIT Series||
|Data Sheet:||(229 KB)|