<< Megger Megohmmeters / Insulation Testers

Megger MIT510
5 kV Insulation Resistance Testers

AC or Battery Powered
Digital/Analog Backlit Display
Selectable Test Voltage from 50 to 5000V
Automatic IR Tests
Measures to 15 TΩ
Complete with Calibration Certificate

Click here for a larger image of the Megger MIT510
Megger MIT510 Shown

Product Information
Specifications	HTML
Ordering Info
PDF Help

This new Megger MIT510 5 kV insulation resistance tester from Megger is designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP54. In addition, the model number is marked on both the top and side of the case for ease of identification in stores or vehicles.

The instrument has a large easy to read backlit LCD display making it equally suitable for use in both bright sunlight and poorly lit environments. Information displayed includes resistance, voltage, leakage current, capacitance, battery status and time constant. In addition, the elapsed time of the test is displayed constantly removing the need for separate timers.

The controls of the instrument are clear and unambiguous and a "quick start" guide is included in the lid of the instrument removing the need to carry bulky manuals under site conditions. The instrument is fitted with a guard terminal to enhance accuracy. The guard test lead is included as standard with the instrument.

To further enhance the flexibility of the instrument the MIT510 has the facility to set the test voltage in steps from 250 V to 5000 V avoiding the expense of several insulation resistance testers to meet your application needs.

This insulation resistance tester is designed to meet the highest safety standards and meets the requirements of EN61010. In addition, the instrument measures the voltage at the terminals and if this is above 50V then the instrument will display the high voltage warning and inhibit testing. At the end of the test the instrument will automatically discharge the energy transferred to the equipment during the test phase.

		MIT510
Voltage Input Range		85-260 V ±-10% rms 50/60Hz and DC
Battery Life		8 Hours Continuous Testing at 5 kV
Test Voltages		250V, 500V, 1000V, 2500V, 5000V
Accuracy (23°C)		±5% to 1 TΩ, ±10% to 15 TΩ
Guard		2% error guarding 500 kΩ leakage with 100 MΩ load
Display range	Digital Display	10 kΩ to 15 TΩ
	Analog Display	100 kΩ to 1 TΩ
Short Circuit/charge current		3 mA
Capacitor Charge Time		25 seconds per µF at 3 mA
Capacitor Discharge Time		25 seconds per µF to discharge 5000V to 50V
Capacitance Measurement		1 nF to 50 µF (dependent on measurement voltage)
Capacitance Measurement Accuracy (23°C)		±5% ±5 nF
Voltage output Accuracy (0°C to 30°C)		±2% ±1 V of nominal test voltage at 100 MΩ load ±25 V for test voltages less than 500 V
Current measurement range		±0.01 nA to ±5 mA
Current Measurement Accuracy (23°C)		±5% ±0.2 nA at all voltages
Display		Analog/Digial 3 digits
Interference rejection		1 mA rms per kV test voltage, 2 mA rms Maximum
Timer range		Up to 99 Minutes
Test regimes		Auto IR
Lead Set		Three flexible silicon insulated leads with compact clamp
Ingress protection (lid Closed)		IP65

Ordering Information
Model	Description	Buy Online	Price
MIT510	Megger MIT510 5 KV Insulation Resistance Tester - Special Price!		$3,002.00 (Reg. $3,160.00)

Megger MIT510 5 kV Insulation Resistance Testers

Megger MIT510
5 kV Insulation Resistance Testers