| Specifications MIT410TC |
| Nominal Test Voltages |
50 V, 100 V, 250 V, 500 V |
| Insulation resistance range |
100 GΩ |
| Range Full Scale Accuracy |
500 volts ±3% ±2 digits ±0.4% per GΩ
250 volts ±3% ±2 digits ±0.8% per GΩ
100 volts ±3% ±2 digits ±2.0% per GΩ
50 volts ±3% ±2 digits ±4.0% per GΩ |
| Analog range |
1 GΩ full scale |
| Short Circuit Current |
2 mA +0% -50% |
| Terminal voltage |
-0% +20% ±1 V |
| Test Current on load |
1 mA at min. pass value of insulation specified in BS7671, HD384 and IEC364, 2 mA max. |
| EN61557 Operating range |
0.10 MΩ to 1.00 GΩ |
| Leakage Current |
10% ±3 digits |
| Voltage display |
3% ±3 digits ±0.5% of rated voltage |
| Continuity |
Measurement:0.01 Ω to 99.9 Ω (0 to 100 Ω on analog scale)
Accuracy:±3% ±2 digits (0 to 100 Ω)
Open circuit voltage: 5 V ±1 V
Test current: 200 mA (–0 mA +20 mA), (0.01 Ω to 9.99 Ω), 20mA (±1 mA ), (10.0 Ω to 99.9 Ω)
Zero offset at probe tips: 0.10Ω typical
Lead resistance zeroing: Up to 9.00 Ω
Buzzer: Variable limit 1Ω, 2Ω, 5Ω,10Ω, 20Ω |
| Resistance |
Measurement: 0.01 kΩ to 1000 kΩ (0 to 1 MΩ on analog scale)
Accuracy: ±3% ±2 digits
Open circuit voltage: 5 V ±1 V
Short circuit current: 20 μA ± 5 μA |
| Voltage range |
0 to 600 V d.c. ±2% ±2 digits
10 mV to 600 V TRMS sinusoidal (40 to 400 Hz) ±2% ±2 digits
0 to 1000 V on Analog scale
Unspecified input level 0 - 10 mV (40 to 400 Hz) |
| Frequency |
40 - 450 Hz (40 Hz - 99.9 Hz) ±0.5% ±1 digit (100 Hz to 450 Hz) |
| Dimensions |
220 x 92 x 50 mm (8.66 in. x 3.63 in. x 1.97 in.) |
| Operating range |
-10 to +55° C |
| Operating humidity |
90% RH at 40° C max. |
| Storage temperature range |
-25 to +70° C |
| Calibration Temperature |
+20° C |
| Maximum altitude |
2000 m |
| Dust and water protection |
IP54 Protected against dust and splashing water |
)
PDF Help