|

Test Equipment Catalog

Specials

Repair

Surplus

Ordering/Contact Info

Megger Catalog | Megger Price List

<< Megger Megohmmeters / Insulation Testers
Megger MIT1020/2 10 kV Insulation Resistance Tester with Data Storage
Line supply or battery operated Digital/analog backlit display Measurement range to 35 TΩ (10-kV model) Automatic insulation resistance tests Automatic dielectric absorption ratio, polarization index, step voltage, and dielectric discharge tests (MIT520/2 and MIT1020/2) RS232 or USB download of results (MIT520/2 and MIT1020/2) Ingress protection to IP65 3 mA short circuit current	Megger MIT1020/2 Shown
	Product Information Datasheet 450 KB Manual 423 KB Specifications HTML Ordering Info PDF Help
The 10 kV insulation resistance tester from Megger is designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. IEEE 43-2000 recommends the use of 10 kV for motor windings rated above 12 kV and the Megger MIT1020 facilitates this. The case is incredibly rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP54. In addition, the model number is marked on both the top and side of the case for ease of identification in stores or vehicles. The instruments have a large easy to read backlit LCD display making it equally suitable for use in both bright sunlight and poorly lit environments. Information displayed includes resistance, voltage, leakage current, capacitance, battery status and time constant. In addition, the elapsed time of the test is displayed constantly removing the need for separate timers. The instrument can test when being powered by the mains or its internal rechargeable battery, a great benefit when site conditions are unknown or long term testing is required. The controls of the instrument are clear and unambiguous and a "quick start" guide is included in the lid of the instrument removing the need to carry bulky manuals under site conditions. The instrument is fitted with a guard terminal to enhance accuracy. The guard test lead is included as standard with the instrument. To further enhance the flexibility of the instruments both have the facility to set the test voltage in steps from 50 V to the maximum output voltage avoiding the expense of several insulation resistance testers to meet your application needs. These insulation test instruments are designed to meet the highest safety standards and meets the requirements of EN61010. In addition, the instruments measure the voltage at the terminals and if this is above 50 V then the instruments will display the high voltage warning and inhibit testing. At the end of the test the instruments will automatically discharge the energy transferred to the equipment during the test phase. The MIT520 and MIT1020 are equally suited to routine testing and diagnostic regimes being pre-programmed with IR, PI, DAR, SV and DD profiles.
MIT520/2 MIT1020/2 Voltage Input Range 95-240 V ±-10% rms 50/60Hz and DC Battery Life 8 Hours Continuous Testing at 5 kV 4 Hours Continuous testing at 10 kV Test Voltages 50 V to 1 kV in 10 V steps, 1 kV to 5 kV in 25 V steps Accuracy (23°C) ±5% to 1 TΩ, ±20% to 15 TΩ ±5% to 1 TΩ, ±20% to 35 TΩ Guard % error guarding 500 k 1/2 leakage with 100 MΩ load Display Range Digital Display 10 kΩ to 15 TΩ2 10 kΩ to 35 TΩ Analog Display 100 kΩ to 15 TΩ2 100 kΩ to 35 TΩ Short Circuit/Charge Current 3 mA Capacitor Charge Time 25 seconds per µF at 3 mA Capacitor Discharge Time 25 seconds per µF to discharge 5000V to 50V 25 seconds per µF to discharge 10000V to 50V Capacitance Measurement 1 nF to 50 µF (dependent on measurement voltage) Capacitance Measurement Accuracy (23°C) ±5% ±5 nF Voltage Output Accuracy (0°C to 30°C) ±2% ±1 V of nominal test voltage at 100 MΩ load ±25 V for test voltages less than 500 V Current Measurement Range ±0.01 nA to ±5 mA Current Measurement Accuracy (23°C) ±5% ±0.2 nA at all voltages Display Analog/Digital 3 digits Interference rejection 1 mA rms per kV test voltage, 2 mA rms Maximum Timer range Up to 99 Minutes Memory capacity 32 kB Test regimes Auto IR, PI, DAR, SV, and DD Lead Set Three flexible silicon insulated leads with compact clamp Ingress protection (lid Closed) IP65

Ordering Information
Model	Description	Buy Online	Price
MIT10202	Megger MIT1020/2 10 kV Insulation Resistance Tester with Data Storage		Sale $4,878.25 (Reg. $5,135.00)
Included Accessories
	3 - 10ft (3 m) Lead Set, Medium insulated clips 3 - 10ft (3 m) Lead Set, Large insulated clips 1 - RS232 Cable 1 - USB Cable 1 - Line Cord 1 - Pouch 1 - Users Guide (CD Version)	Included
Optional Accessories
1000441	Megger 1000-441 10m (33 ft) Lead set, medium size insulated clips		Sale $356.25 (Reg. $375.00)
1000442	Megger 1000-442 15m (49 ft) Lead set, medium size insulated clips		Sale $513.00 (Reg. $540.00)
1000443	Megger 1000-443 10m (33 ft) Lead set, large size insulated clips		Sale $375.25 (Reg. $395.00)
1000432	Megger 1000-432 15m (49 ft) Lead set, large size insulated clips		Sale $527.25 (Reg. $555.00)

$20.00 Minimum on Total Order

Home Page | Test Equipment Catalog | Specials | Repair
We Buy Surplus | Ordering/Contact Info
____________________________________________________________

99 Washington Street, Melrose, MA 02176
781.665.1400 | 800.517.8431 | Fax: 781.665.0780 | Email:

Copyright © Fotronic Corporation All Rights Reserved