- DC and AC current and voltage
- 600 A and 600 V
- Resistance and Continuity 3 3/4 digit, 4000 count display with Backlight
- High resolution digital bargraph
- Peak, Min/Max and Data-hold functions
- Zero-offset REL mode for comparative measurements
- Supplied complete with test leads and carry case
- IEC61010 CAT III 600 V
The Megger MIT30 30 kV DC Insulation Resistance Tester is portable, developed to undertake tests on UST (ungrounded test samples). It satisfies the demand for a variety of high voltage, high accuracy, and low current applications.
The MIT30 has a test current of up to 330 μA, and user selectable trip levels from 0 to 360 μA. The MIT30 provides protection to the test piece against flashovers (arcing) and further damage in the event of a breakdown. An audible ionization indicator gives an audio indication if any electrical discharges present during the test period.
The MIT30 can be used to perform step-voltage and proof tests which, when incorporated into a routine maintenance program, can aid in predicting potential failure before breakdown occurs.
The MIT30 will operate from a wide range of input voltages and frequencies, from 85-264 VAC, with a frequency range of 47-440 HZ.
Note: The MIT30 CANNOT be used on grounded/earthed test samples; misuse of this equipment will result in damage.
|Output Voltage:||0 to 30 kV dc (variable negative with respect to earth/ground) 20MΩ minimum|
|Output Maximum Current:||330 μA @ 30 kV|
|Output Peak-Peak Ripple:||< 0.4%|
|Output Line Regulation:||0.03%|
|Output Load Regulation:||0.001%|
|Current:||330 μA continuous @ 30 kV
User selectable trip from 0 to 360 μA
|Voltage Meter Accuracy:||±1.5% (full scale)
10 V resolution
|Current Meter Accuracy:||±1.5% (full scale)
100 nA resolution
|Main AC Input:||85 - 264 VAC
47 - 440 Hz <75 VA
|Dimensions:||360 L x 304 W x 194 D mm (14 L x 12 L x 8 D in.)|
|Weight:||22 lb (10 kg)|
|Operating Temperature:||14 - 131 deg. F (-10 - 55 deg. C)|
|Storage Temperature:||-4 - 158 deg. F (-20 - 70 deg. C)|
|Humidity:||0 - 90% RH (non-condensing)|
|Maximum Altitude (full rating):||1600 m (MSL)|
|IP Ratings:|| IP67 when closed for transport (Def Stan 81-41/STANAG 4280)
IP52 when in use
|222070-62||Megger 222070-62 70 kV high-voltage discharge stick||
|MIT30-DCM340EN-DD||TED Depot Deal MIT30-DCM340EN-DD 30 kV DC Insulation Resistance Tester, Free Clamp Meter||
|Data Sheet:||(203 KB)|