<< Megger Clampmeters

Megger MMC850
Multi-core AC Digital Clampmeter

• Single, Two or three core cable measurement
• Flat or round section cables
• No need to split wires
• Cable centralizing clamp
• Backlit display
• 50Hz and 60Hz supplies

Megger MMC850 Shown
 

Product Information
Datasheet	63 KB
Virtual Demo	Flash
Ordering Info
PDF Help

Conventional current clamp meters have been available for many years and are an accepted method of non-intrusive current measurement. However these instruments can only measure current in a single core cable, requiring multi-core cables to be split before a core can be measured.

Unlike conventional clamp meters, the MMC850 has a complex array of Planer magnetic sensor coils to calculate the current flowing in the conductors of multi-core cables with either 2 or 3 cores, and in either flat or round section cable, up to 100 A. The convenience and potential time saving from using the multi-core clamp is considerable.

A single button switches the clamp between multi-core and single core operation, ensuring the MMC850 is the only clamp meter you need to carry.

The MMC850 has a tough and light weight clamp head, allowing great access to awkward locations and cables. The inner jaw clamp centralizes the cable to be measured ensuring best accuracy.

The MMC850 is suitable for supply frequencies from 45Hz to 400Hz. Current measurement to 200 A on single core and 100 A on multi-core cables is possible, with a resolution to 0.1 A, so covering the majority of power applications including Military/Aviation.