Test Equipment Depot Top Nav Bar


	\|

Test Equipment Catalog

Specials

Repair

Surplus

Ordering/Contact Info

Megger Catalog | Megger Price List

<< Megger Catalog
<< Megger Cable Fault Testers

Megger SCT-SMA
SCT Single Mode Fiber Optic Adapter

Features:

Certify multimode fiber optic links at 1310, 1550 nm wavelengths
Provide fully compliant Tier 1 Certification
Capabilities include length, loss and power measurements, power meter and light source
Perform bi-directional testing without swapping primary and secondary units
Integrated VFL for diagnosing link problems
Most intuitive and easy to operate fiber optic certification tester on the market

Megger SCT-MA Shown

Product Information
Datasheet	785 KB
PDF Help

As the number of fiber optic links in the network increases it’s essential that your certification tester seamlessly certifies both copper and fiber, efficiently combining all media results together for analysis and reporting. The SCT-SMA fiber optic adapters fulfill this need by converting the SCT into a fully compliant Tier 1 singlemode fiber optic certification tester. Now you can confidently certify all of your copper and fiber optic links with the snap of an adapter.

Specification SCT-SMA
Input (Receiver) Connectors	Fixed SC Adapter
Output (Source) Connectors	Fixed SC Adapter
Source Type and Nominal Wave length	1310 nm FP laser and 1550 nm FP laser
Source Power	-5dBm at 1310/1550
Length Measurement	0 – 15000m of 9 μm fiber
Power Meter Type	InGaAs detector
Power Measurement Dynamic Range	0 to -50 dB (1300nm, 1310 nm and 1550 nm) 0 to -45 dB (850 nm)
Laser Safety	Class I
VFL Specifications
Output Power	≤1 mW
Operating Wavelength	635 nm nominal
Output Modes	Continuous and modulated
Output Connector	2.5 mm universal
Laser Safety	Class II CDRH
Environmental Specification
Operating Temperature	0º C to 40º C
Storage Temperature	-20º C to 60º C
General Specification
Dimensions (L x W x H), nominal	87 mm x 95 mm 29 mm (3.4” x 3.7” x 1.1”)
Weight, nominal	0.16 kg (0.35 lb)