The Megger 246301 Receiver Kit for BITE2 and BITE2P is a direct replacement for the standard receiver supplied with the original BITE, the BITE2 and the BITE2P. It provides data storage capabilities without having to replace the BITE transmitter.

The receiver incorporates the potential leads, clamp-on current sensor, and data storage capabilities in one unit. The unit stores more than 2000 sets of data (cell impedance, cell voltage and interconnecting strap resistance).

At any time during a test, the operator can review the current test results by using arrow keys and scrolling back through the active test screen. If needed, the operator can retest any of the cells and straps in the current test.

Stored data also can be downloaded via the RS-232 connector directly to a PC via the Power DB software.

The clamp-on current sensor is connected to the receiver during testing and clamped around a convenient inter-tier or inter-cell connection within the loop created by the current source leads from the transmitter and the battery string.

If the inter-cell or inter-tier connection used consists of more cables than the diameter of the clamp-on current sensor can encompass, the receiver has a split strap function.

With the optional bar-code scanner, additional information can be recorded and stored such as location identification, ambient and pilot cell temperature.