| Specifications |
| Frequency |
| Range |
9 kHz to 6.2 GHz |
| Resolution |
Minimum 1 Hz |
| Span Range |
100 Hz/div to 300 MHz/div
1,2,5 steps Selection(Automatic)
ZERO Span
FULL Span (9kHz
to 6.2GHz) |
| Frequency Selection |
Start, Stop, Center Span Setup |
| Span Accuracy |
±3% of the Indicated Span Width |
| Readout Accuracy |
≤±(Indicated frequency ×reference frequency
accuracy + span x span accuracy + 50% of RBW) |
| Phase Noise |
≤-90 dBc/Hz @10 kHz offset |
| Amplitude |
| Range |
+ 20 dBm ~ -105 dBm, + 20 dBm ~
-130 dBm (Pre Amp ON) |
Average Noise Level
(1 kHz RBW, 10 Hz VBW) |
≤-105 dBm |
150 kHz ~ 2.7 GHz |
| ≤-127 dBm (Pre Amp On) |
20 MHz ~ 2.7 GHz |
| ≤-100 dBm, -123 dBm (Pre Amp On) |
2.7 GHz ~ 6.2 GHz |
| ≤-130dBm (Pre Amp On) ; Typically |
| Amplitude Unit |
dBm, dBmV, dBμV, V, mV, μV, W, mW,
μW |
Display Scale
Linearity |
≤±1.5 dB / 70 dB (10 dB / div)
≤±1.5 dB / 40 dB (5 dB / div)
≤±0.5 dB / 8 dB (1 dB / div)
≤±0.5 dB / 16 dB (2 dB / div) |
Frequency Response
(Based on 0dB atten) |
-3.5 ~ 1.5 dB (100 kHz ~ 10 MHz)
±1.5 dB (10 MHz ~ 6.2 GHz) |
| Reference Level |
Range : 20 dBm ~ -90 dBm
Resolution : 0.1 dB
Accuracy : ±1.5 dB |
2nd Harmonic
Distortion |
≤-60 dBc, -40 dBm input |
| Intermodulation Distortion |
≤-70 dBc, -40 dBm Input |
| Residual Spurious |
≤-85 dBm (Input terminated, 0 dB
attenuation) |
| Other Input Spurious |
≤-60 dBc, -30 dBm Input |
| Resolution Bandwidth |
Selections: 1kHz, 3kHz, 10kHz,
30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz
Accuracy:
±20%
Selectivity: 60 dB / 3 dB ratio (<15:1, 60 dB / 6 dB
ratio <12:1 (9 kHz, 120 kHz)
Switching Error: ≤±1.0 dB (1 kHz
Reference RBW) |
| Video Bandwidth |
10 Hz to 3 MHz in 1-3-10 step |
| SWEEP |
| Rate |
100 ms to 1000 sec, 40 ms to 1000
sec (Zero span) |
| Accuracy |
≤±20% |
| Trigger Source |
External(rear), Video, Free run,
Line |
| Trigger Modes |
Continuous, Single |
| Trigger Level |
TTL level |
| Memory |
| Trace Storage |
Maximum 900 waveforms |
| Setup Storage |
Maximum 3000 states |
)
PDF
Help