| Specifications |
|
Single Link System Video |
|
Color System |
Quantization |
Format |
Corresponding Standards |
| Scanning |
Frame(Field) Rate |
Y, CB, CR 4:2:2 |
10 bits |
1080i |
60/59.94/50 |
SMPTE 274MSMPTE 292M |
| 1080p |
30/29.97/25/24/23.98 |
| 1080PsF |
30/29.97/25/24/23.98 |
SMPTE RP211SMPTE 292M |
| 720p |
60/59.94/50/30/29.97/25/24/23.98 |
SMPTE 296MSMPTE 292M |
| 525i |
59.94 |
SMPTE 259M |
| 625i |
60 |
|
Color System |
Quantization |
Format |
Corresponding Standards |
| Scanning |
Frame(Field) Frequency |
|
GBR 4:4:4 |
10 bits |
1080p |
30/29.97/25/24/23.98 |
SMPTE 372M(1920x1080) |
| 1080PsF |
30/29.97/25/24/23.98 |
| 1080i |
60/59.94/50 |
| 12 bits |
1080p |
30/29.97/25/24/23.98 |
| 1080PsF |
30/29.97/25/24/23.98 |
| 1080i |
60/59.94/50 |
|
Y, CB, CR 4:2:2 |
10 bits |
1080p |
60/59.94/50 |
| 12 bits |
1080p |
30/29.97/25/24/23.98 |
| 1080PsF |
30/29.97/25/24/23.98 |
| 1080i |
60/59.94/50 |
|
Corresponding Standards |
|
Format Setting |
Can be set automatically based
on the corresponding format or set manually (Set manually for dual
link) |
| Supported Sampling Frequencies |
HD:74.25 MHz or 74.25/1.001 MHz |
|
External Sync |
Automatically set from the
corresponding format |
|
Audio Playback |
|
Compliant Standard |
HD:SMPTE-299M, SD:SMPTE-272M |
|
Sampling Frequency |
48 kHz (must be synchronized to
the video signal) |
|
Quantization |
HD:24 bits, SD:20 bits |
|
Synchronization |
All audio channels must be
synchronized to the video clock. |
|
Channel Separation |
2 groups of 8 channels are
selectable. |
|
Input/Output Connectors |
|
SDI Input |
Input Connector |
2 BNC connectors (A/B switching) |
|
Input Impedance |
75 Ω |
|
Input Return Loss |
≥15 dB for 5 MHz to the serial
clock frequency |
|
Maximum Input Voltage |
±2V (DC + peak AC) |
|
External Reference Input |
Input Signal |
Tri-level sync or NTSC/PAL black
burst signal |
|
Input Connector |
1 pair of BNC connectors
loop-through |
|
AES/EBU Input |
Input Connector |
1 BNC connector |
|
Supported Formats |
IEC 60958 |
|
Sampling Frequency |
48 kHz |
|
SDI Output |
Output Connector |
1 BNC connector |
| Reclocks and transmits the
selected SDI input signal |
|
Output Impedance |
75 Ω |
|
Output Voltage |
≥15 dB for 5 MHz to the serial
clock fre-quency |
|
Headphone Output |
Output Signal |
The LV 7330 extracts and
transmits the audio signal embedded in an SDI signal.(Must be
synchronized to the video signal.) |
|
Output Connector |
One 6.3-mm (1/4 in.) stereo jack |
|
Volume Adjustment |
Configured in the menu |
|
Impedance |
32 Ω (16 to 600 Ω) |
|
Control Connectors |
|
USB Connector |
Function |
Used to save screen captures,
event logs, preset data, and data dumps |
|
Specifications |
USB 2.0 |
|
Media |
Only USB memory devices are
supported |
|
Remote Connector |
Function |
Used to recall presets, display
a tally light, and switch input channels (A/B) |
|
Control Signal |
TTL level (active-low logic) |
|
Control Connector |
15-pin D-sub (female) |
|
Ethernet (Future) |
Function |
Used to control the LV 7330 from
a PC and monitor errors and other events |
|
Compliant Standard |
IEEE802.3 |
|
Input/Output Connectors |
1 RJ-45 connector |
|
Type |
10Base-T/100Base-TX (automatic
switching) |
)
PDF Help