- Independent Timing of 3 Black Burst Outputs
- Genlock to NTSC or PAL Black Burst and Composite Sync
- SDI Output Conforms to SMPTE 259M
- Simultaneous SD-SDI and Analog Composite Outputs
- AES/EBU Digital or Analog Audio Output
- Equipped with Stereo Sound Output
- Word Clock Output at 44.1 kHz or 48 kHz
- PC Setup of Format, Test Patterns, Audio Frequency,
Black Burst
and Genlock Timing via RS-232C
- Remote Control Software Supplied on CD-ROM
- Half Rack Size with Rack Mount
|
 
|
| The LT 428
component digital sync generator is an economical, compact 1U half-rack
solution. It is equipped with 3 independent black burst outputs, to
facilitate system timing and synchronization of digital and analog systems.
Genlock allows synchronization to NTSC or PAL video signals, black burst,
and composite sync. Simultaneous test signal outputs are provided for
component serial digital output conforming to SMPTE 259M and composite
analog. Test patterns, 24 total, include 10-bit color bars for FCC, SMPTE,
EBU, 75%/100% full field and 75% red with colorbars. Other patterns
include 10%/15%/20%/100% window, pluge, crosshatch, staircase 5/10 step,
digital gray, check field, black, 100% white, 15kHz Bl/Wh, 75% red field.
AES/EBU digital and analog audio 2-channel outputs are selectable. Word
clock output is available at 44.1 kHz or 48 kHz. System setup is accomplished
from a Windows PC via the RS-232C interface to set changes such as selection
of NTSC or PAL, black burst and genlock timing, video output pattern,
and audio frequency. Remote control software is supplied on a CD-ROM. |
){kind=small}
