| Specifications |
| Function |
Description |
| Channel Coding Section |
| RF Signal Generator |
| Frequency |
Range |
30 to 960 MHz |
| Resolution |
1 kHz (When the frequency is being
set) |
| Channels |
Differs according to the broadcast
system |
| Accuracy |
±0.3 × 10-6 |
| Output |
Range |
-110.0 to +13.0 dBm (50Ω termination)
-63.0 to +60.0 dBmV (50Ω termination)
-3.0 to +120.0 dBμV (50Ω termination) |
| Resolution |
0.1 dB |
| Impedance |
50 Ω |
| Level Accuracy |
±1.2 dB (When the output is CW, the
level is 0 dBm, and C/N is OFF) |
| Output Control |
On/Off, Modulation/Carrier (Does
not turn output OFF completely, but applies the maxi-mum
attenuation.) |
| Output Connector |
N connector |
| Harmonics |
-30 dBc |
| Spurious |
-50 dBC |
| Input/Output Signal
Source |
| Internal Signal |
| Pseudo Random Signal |
PN23 and PN15 |
| Still Images |
Pattern (Common) |
Color, Ramp, and Monoscope |
| Audio (Tone) |
1 kHz (LR), 400 Hz (LR), and 1 kHz
(L) + 400 Hz (R) |
| Video |
TS playback from disk and TS storage
to disk |
| DVB-ASI Input |
| Input Connector |
BNC |
| Input Impedance |
75 Ω |
| Input Level |
LVDS |
| Input Format |
Automatic input switching between
MPEG-2 TS and BER count |
| DVB-SPI Input |
| Input Connector |
D-sub25 |
| Input Impedance |
Differential, 100 Ω |
| Input Level |
LVDS |
| Input Format |
Automatic input switching between
MPEG-2 TS and BER count |
| ASI, SPI Input
Specifications |
| Input Packet Format |
188 or 204 bytes |
| Supported Stream |
MPEG-2 TS (ISO/IEC13818-1) |
| External REF Input |
| Input Connector |
BNC |
| Input Impedance |
50 Ω |
| Input Level |
3.3 Vp-p |
| Input Frequency |
10 MHz |
| REF Output |
| Output Connector |
BNC |
| Output Impedance |
50 Ω |
| Output Level |
3 dBm |
| Output Frequency |
10 MHz |
| IF Output |
| Output Connector |
BNC |
| Output Impedance |
50 Ω |
| Output Level |
-22 dBm |
| Output Frequency |
140 MHz |
| TS Source Section |
| Internal HDD |
| Size and Format |
2.5 inches and IDE interface |
| Format: |
EXT3 |
| Capacity |
80GB |
| Number of Drives |
1 |
Compatible External HDDs
(External hard drives with the specifications listed below can be used) |
| Interface |
USB 2.0 |
| Format |
VFAT and NTFS (Read only) |
| Disk Spin Speed |
5400 rpm or higher |
| Maximum Connections |
4 |
Compatible External DVD-ROM Drives
(External DVD-ROM drives with the specifications listed below can be used) |
| Interface |
USB 2.0 |
| Maximum Connections |
2 (1 connection each on the
front and back panels) |
| Supported Stream |
| Format |
MPEG-2 TS |
| Packet Length |
188 or 204 bytes |
| File Size |
Up to 1 TB |
| Playback |
| Playback Bit Rate |
0.2 to 40 Mbps |
| Loop Playback |
Available (seamless loop playback is
not supported) |
| Range Playback |
Start and end times can be specified |
| Memory Playback |
Selectable |