|
Features |
|
Function |
Descriptions |
|
RF
Output |
|
Frequency Range:
|
30 MHz to 950 MHz |
|
Frequency
Resolution: |
50 kHz |
|
Frequency
Accuracy: |
10 ppm |
|
Frequency
Switching Time: |
Within 100 ms |
|
Frequency Setting |
Channel Mode:
|
Setting with a
built-in channel table |
|
Frequency Mode:
|
Setting an arbitrary frequency |
|
Output Impedance:
|
75 Ω |
|
Output Connector:
|
BNC |
|
Output Level
Range: |
-80 to 0 dBm (0 dBm max.) |
|
Level Resolution:
|
1 dB |
|
Output Level
Accuracy: |
±2 dB (0 to -9 dBm)
±3 dB (-10 to -80 dBm) |
|
Spurious: |
Within -30 dBc (Harmonics)
Within -40 dBc (Non-Harmonics) |
|
Video Signal |
|
Modulation
System: |
Amplitude modulation of the VSB
(vestigial sideband) system according to a broadcast system |
|
Modulation |
At the time of
built-in channel table setting: |
87.5 %±3 % (Negative
modulation)
97.0 %±3 % (Positive modulation) |
|
At the time of
arbitrary setting: |
0 to 100 % (in 0.5 % steps) |
|
Modulation
Frequency Band |
At the time of
built-in channel table setting: |
4.2 MHz/5.0 MHz/6.0 MHz
(Depends on a broadcast system) |
|
At the time of
arbitrary setting: |
4.2 MHz/5.0 MHz/6.0 MHz |
|
Modulation
Frequency Flatness: |
±1 dB |
|
Input Impedance:
|
75 Ω |
|
Input Connector:
|
BNC Reference |
|
Input Level:
|
1 Vp-p |
|
Spectrum
Polarity: |
Positive (upper sound wave) |
|
Built-in Pattern: |
Full-field Color Bar (NTSC/PAL)
Line sweep (at 100 % modulation: 4.2 MHz) (NTSC/PAL) |
|
Sound Signal |
|
Carrier Frequency |
At the time of
built-in channel table setting: |
4.5 MHz/5.5 MHz/6.0 MHz/6.5 MHz
(Depends on a broadcast system) |
|
At the time of
arbitrary setting: |
4.5 to 6.5 MHz (in 0.5 MHz
steps) |
|
Video Sound Ratio |
At the time of
built-in channel table setting: |
-6 dB/-7 dB/-10 dB (Depends on
a broadcast system) |
|
At the time of
arbitrary setting: |
-30 to 0 dB (in 1 dB steps) |
|
Modulation Types: |
FM/AM (L System) (Depends on a
broadcast system at the time of built-in channel table setting) |
|
Frequency
Deviation |
At the time
of a built-in channel table Setting: |
15 kHz/30 kHz (equivalent to 60
% of the maximum deviation for each broadcasting system) |
|
At the time of an
arbitrary setting: |
0 to 100 kHz (in 1 kHz steps) |
|
Modulation (AM)
|
At the time of
built-in channel table Setting: |
60 % |
|
At the time of
arbitrary setting: |
0 to 60 % (in 1 % steps) |
|
Pre-Emphasis
|
At the time of
built-in channel table setting: |
75 μs/50 μs |
|
At the time of
arbitrary setting: |
75 μs/50 μs/OFF (Depends on a
broadcast system) |
|
Modulation
Frequency Response: |
40 Hz to 100 kHz |
|
Modulation
Frequency Flatness: |
±1 dB |
|
Reference Input
Level: |
0 dBm (0.775 Vrms) |
|
Input Impedance: |
600 Ω |
|
Input Connector: |
BNC |
|
Built-in Sound
Signal: |
Sine wave 400 Hz/1 kHz |
|
Preset Function:
|
Up to 100 sets of panel
settings can be stored and recalled. |
){kind=small}
147
kB 
PDF Help
