<< Lascar Catalog
<< Lascar Data Loggers
|
Lascar EL-USB-TC
Thermocouple Data Logger with USB Interface
|
- -200 to +1350ºC (-328 to +2462ºF) K-type measurement range
- -200 to +1190ºC (-328 to +2174ºF) J-type measurement
range
- -200 to +390ºC (-328 to +734ºF) T-type measurement
range
- USB interface for set-up and data download
- User-programmable alarm thresholds
- Status indication via red and green LEDs
- Bright Red and Green LED Indication
- Supplied with replaceable internal lithium battery,
Windows control software and basic K-type thermocouple (0 to
400°C/32 to 752°F)
|
 
Lascar EL-USB-TC Shown
|
| |
The EL-USB-TC data logger measures and stores over 32,000
temperature readings from either a K, J or T type thermocouple. A
thermocouple is attached via the thermocouple socket at the base of
the unit. The user can easily set up the thermocouple type, logging
rate, start-time, logging mode, and download the stored data by
plugging the module straight into a PC's USB port and running the
purpose designed software under Windows 2000, XP or Vista. Data can
then be graphed, printed and exported to other applications. The
data logger is supplied complete with a long-life lithium battery,
which will last for approximately 6 months.
Easy to install and use, the control software runs under Windows
2000, XP (Home and Professional Editions) and Vista (32-bit). It
allows the user to set up and download any EL-USB-TC. |
| |
|
Specifications |
Min |
Max |
Unit |
Typical |
Probe Measurement range
(K-type) |
-200 (-328) |
+1350 (2462) |
°C(°F) |
|
Probe Measurement range
(J-type) |
-200 (-328) |
+1190 (2714) |
°C(°F) |
|
Probe Measurement range
(T-type) |
-200 (-328) |
+390 (734) |
°C(°F) |
|
|
Operating Temperature range |
-10 (14) |
+40 (104) |
°C(°F) |
|
|
Resolution (internal and
displayed) |
|
|
°C(°F) |
0.5 (1) |
|
Accuracy (logger error) |
|
|
°C(°F) |
+/- 1(2) |
|
Logging rate |
Every 1Sec |
every 12 hours |
- |
|
|
1/2AA 3.6V Lithium Battery
Life |
|
|
Month |
6 |
|
| |
EL-USB-TC features 2 LEDs
- The first LED flashes orange (O) to indicate a problem condition
on the EL-USB-TC.
- The second LED flashes green or red (G/R) to indicate alarm level
status. It will flash red when the logged temperature has exceeded a
Low or High alarm level.
-
LED
Modes/Warning signals chart
Hold is enabled by default, which forces the logger to continue
flashing the red LED after an alarm, even when the temperature has returned to normal. This feature ensures that the user is noticed that an alarm level has been exceeded, without the need to download the data from the logger.
Hold can be turned off via the control software. The red LED will then only ash whilst the logger is in an alarm condition. When the temperature returns to normal, the green LED will ash. |
| |
)
PDF Help