Phone 800-517-8431
Free Shipping over $75
HOME > LASCAR > DATA-LOGGERS > WIFI-DATA-LOGGERS > HIGH-ACCURACY-WIFI-TEMPERATURE-ELWIFITHPLUS

Lascar EL-WIFI-TH+

High Accuracy WiFi Temperature & Humidity Data Logging Sensor

Brand: Lascar
Model No: EL-WIFI-TH+
Our Model No: ELWIFITHPLUS
Condition: NEW
EL-WIFI-TH+
($185.00)
Sale $158.17
Add to Cart
  • WiFi capability and integrated display
  • Wireless connectivity to PC via WiFi
  • Measurement range from -20 to +60°C (-4 to +140°F)
  • Temperature accuracy ±0.2°C (0 to +60°C)
  • Humidity accuracy ±1.8% (10 to +90%RH)

The Lascar EL-WiFi-TH+ sensor measures the temperature and humidity of the environment in which it is situated. This high accuracy version is accurate to ±0.2?C and ±1.8%RH humidity. Data is streamed wirelessly over any WiFi network and can be viewed on a PC using free software package or on The Lascar EL-WiFi-Cloud*. During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although The Lascar EL-WiFi sensors have an impressive range this can be increased by using WiFi extenders.

The Lascar EL-WiFi-TH+ is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adapter using the USB lead provided or can be permanently powered by the USB wall adapter.

The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for free from www.lascarelectronics.com.

The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws / sticky pad provided.

↑ Back to Top