KEP DRT
Dual Rate Total: Two Separate Ratemeters, Totalizers with Combination Functions

• Displays A, B, & C Rate and A, B, & C Total
• Separate Scaling Factors For A & B Inputs
• "C" Displays A+B, A-B, A÷B, & A÷A+B
• RS422/RS232 Serial Communication
• Modbus RTU RS422/RS485/RS232
• Pulse Input - 10 kHz Max.
• Security Lockout
• NEMA 4X / IP65 Front Panel
• 30mV Magnetic Pickup Inputs

KEP DRT Shown

A 4-20mA (0-20mA) output of the C rate or total is optional. The user can press the VIEW button to see 6 separate items total A, total B, total C, rate A, rate B, rate C. Negative values are displayed with a negative symbol (-12345). For the C value, the user can choose from the following combination of A&B inputs: TOTAL; with a choice of A+B or A-B; RATIO with choice of A÷B(x100) to show percent of A to B quantity or A÷[A+B(x100)]to show percent of A to total quantity.

Two independent presets are standard. User selects whether output A is activated by total or rate value of input A or selected C. Output B can be activated by total or rate value of input B or selected C. Outputs activated by A or B total can be set to latch or auto recycle with an adjustable output duration from 00.1 to 99.9 sec. For rate, ratio, or C total outputs pull in when value is equal or above the preset and drop out when value is below the preset minus the selected 0 to 999 hysteresis.