<< KEP Flow
Batchers
KEP BT2 BATCHtrol-2
Batch Controller with Two Stage Valve Control
|
- Easy To Use Batch Controller
- Start/Stop Buttons & Remote Inputs
- Separate 8 Digit K-Factors For Rate & Total
- Accepts Pulse or Analog Inputs
- Displays Rate, Total and Grand Total
- Security Lockout with Missing Pulse Detection
- Scaled Pulse Output
- Two Way RS232/422 Communications Option
|
 
KEP Batchtrol II Shown
|
|
|
| |
Featuring 8 digits of bright, .55 inch, alphanumeric display,
the BATCHtrol II can accept up to 20,000 pulses per second of digital
count. The analog input versions accept inputs, such as 4 to 20 mAor
1 to 5V. The standard unit has two separate, 8 digit, floating
decimal, "K" factors to convert the inputs to meaningful total and
rate data. An optional 16 point K-factor can linearize flow from
non-linear meter outputs. The user, with the push of a button, can
toggle back and forth to view the total of the batch, the rate of
flow or the grand total of flow.
The BATCHtrol 2 may be thought of as two separate counters and a
rate meter. The "batching" counter counts to prewarn and preset
numbers entered by the user and enables separate control outputs.
The "totalizing" counter gives a cumulative reading or grand total.
Finally, the rate meter counts the number of pulses per second and,
with its scaling feature, can provide gallons per minute or any
otherrate measurement without the totalizer losing counts. At any
time, the user may view the total, the grand total or the rate while
never interrupting the counting process.
Setup is done through the front panel and the menu driven software
in the unit. Start-Stop control can be activated via the front panel
buttons or remote inputs.
The unit operates from either 110 VAC/12 to 27 VDC, or optional 220
VAC/12 to 27 VDC. If AC power is used, two built-in regulated12 VDC
@ 100 mA power supplies are offered. They can be connected to
provide +12 VDC and-12VDC or +24 VDC to drive external devices. CMOS
Logic isused to provide high noise immunity and low power
consumption with EEPROM to hold data a minimum of 10 years if power
is interrupted. |
|
|
| Ordering Information |
| Ordering Guide |
|
Function |
Description |
Product Code |
|
Basic Model |
BATCHtrol-2 Batch Controller with Two Stage Valve Control |
BT28 |
STD ($604.00) |
|
Operating Voltage |
110 VAC ±15% or 12 to 27 VDC |
A |
Chose one when ordering |
|
220 VAC ±15% or 12 to 27 VDC |
B |
|
Input Type |
STD Pulse 3-30 VDC 20 kHz Max. |
3A |
Add $0.00 |
|
STD Pulse 3-30 VDC 20 kHz Max. w/ 4.7 KΩ pull
up resistors |
3B |
Add $0.00 |
|
Mag. Pickup Preamplifier (No
analog outputs) |
3M |
Add $63.00 |
|
4-20 mA |
5A |
Add $89.00 |
|
0-20 mA |
5B |
Add $89.00 |
|
1-5 VDC |
5C |
Add $89.00 |
|
0-5 VDC |
5D |
Add $89.00 |
|
0-10 VDC |
5E |
Add $89.00 |
|
4-20 mA Square Law |
6A |
Add $194.00 |
|
4-20mA in, 4-20mA out |
7A |
Add $221.00 |
|
4-20mA in, 0-20mA out |
7AX |
Add $221.00 |
|
4-20mA in, 0-5V out |
7AY |
Add $221.00 |
|
4-20mA in, 0-10V out |
7AZ |
Add $221.00 |
|
0-20mA in, 4-20mA out |
7B |
Add $221.00 |
|
0-20mA in, 0-20mA out |
7BX |
Add $221.00 |
|
0-20mA in, 0-5V out |
7BY |
Add $221.00 |
|
0-20mA in, 0-10V out |
7BZ |
Add $221.00 |
|
1-5VDC in, 4-20mA out |
7C |
Add $221.00 |
|
1-5VDC in, 0-20mA out |
7CX |
Add $221.00 |
|
1-5VDC in, 0-5V out |
7CY |
Add $221.00 |
|
1-5VDC in, 0-10V outt |
7CZ |
Add $221.00 |
|
0-5VDC in. 4-20mA out |
7D |
Add $221.00 |
|
0-5VDC in. 0-20mA out |
7DX |
Add $221.00 |
|
0-5VDC in. 0-5V out |
7DY |
Add $221.00 |
|
0-5VDC in. 0-10V out |
7DZ |
Add $221.00 |
|
0-10VDC in, 4-20mA out |
7E |
Add $221.00 |
|
0-10VDC in,0-20mA out |
7EX |
Add $221.00 |
|
0-10VDC in, 0-5V out |
7EY |
Add $221.00 |
|
0-10VDC in, 0-10V out |
7EZ |
Add $221.00 |
|
Control Outputs |
Open Collector |
1 |
Chose one when ordering |
|
SPDT Relay 10 |
2 |
|
Input Speeds |
0-40 CPS (Inputs 3A, 3B)* |
A |
Chose one when ordering
*: Dip switch selectable, all units
can be field modified easily |
|
0-400 CPS (Inputs 3A, 3B)* |
C |
|
0-20K CPS (Inputs 3A, 3B)* |
E |
|
Inputs 5A-5E, 6A, 7A-7E |
K |
Options
Multiple Options Available |
RS232 Serial Interface |
1 |
Add $142.00 |
|
RS422 Serial Interface |
2 |
Add $142.00 |
|
4-20 mA Output (Input 3A or 3B only) |
3 |
Add $134.00 |
|
0-20 mA Output (Input 3A or 3B only) |
3X |
Add $134.00 |
|
0-5VDC Output (Input 3A or 3B only) |
3Y |
Add $134.00 |
|
0-10VDC Output (Input 3A or 3B only) |
3Z |
Add $134.00 |
|
16 Point Linearization Opt. |
4 |
Add $63.00 |
|
CSA Approved Unit (pending) |
CSA |
Please Call |
|
Extended Temperature: -4°F to 131°F
(-20°C to 55°C) |
ET |
Add $63.00
not available with analog inputs or outputs |
| Sample Order |
|
Sample 1 |
BATCHtrol-2 Batch Controller with Two Stage
Valve Control w/ 220 VAC ±15% or 12 to 27VDC, STD Pulse
3-30VDC 20 kHz Max. w/ 4.7 KΩ pull-up resistors, SPDT Relay
10, 0-40 CPS |
Order # |
BT2-B-3B-2-A |
|
Total |
$604.00 |
|
Sample 2 |
BATCHtrol-2 Batch Controller with Two Stage
Valve Control w/ 110 VAC ±15% or 12 to 27VDC, 0-10VDC in,
0-10V out, SPDT Relay 10, 0-40 CPS, 0-5VDC Output |
Order # |
BT2-A-7EZ-2-A-3Y |
|
Total |
$959.00 |
| Model |
Description |
Buy Online |
Price |
|
BATCHTROLII |
KEP BT2
BATCHtrol-2 Batch Controller with Two Stage Valve Control |
Please Call |
| Included Accessories |
| |
|
Included |
)
