- Wide Frequency Range
The signal generation frequency is 10 Hz to 1 MHz, the entire span
covered in 5 ranges. In addition, a large, single-scaled dial is used
for easy frequency settings.
- Flat Output Voltage
Over the frequency range from 30 Hz to 50 kHz, the output voltage
deviation is held to ±0.2 dB, and to ±0.5 dB over the entire
frequency range.
- Low Distortion
In the audio band (200 Hz to 20 kHz), the distortion is 0.008% or
lower, and the actual measured value is 0.004% at 1 kHz.
- Synchronizing to External Signals
The AG-253 can be synchronized to an external signal, enabling its use
as a synchronized audio signal generator.
- Sine and Square Wave Outputs
Output is possible of low-distortion sine waves or square waves having
excellent rise time characteristics.
- 10 dB-Step Attenuator
The output voltage can be varied continuously from 0 to -50 dB using a
10 dB-per-step attenuator and a fine adjustment.
|
 
Kenwood AG-253 Shown
|
)
